BEP Marine

● The Digital Voltage Sensing Relay (VSR) allows the charging of a second battery (for example services) from a single source load. When the engine is started and the voltage at the engine battery reaches 60% charge, the VSR into operation also allows charging the second battery. When the battery voltage drops engine (the engine stops for example.) the VSR disconnects and isolates the 2 batteri... Read more »

● This switch works with the Digital Voltage Sensing Relay to ensure that will always have a backup battery charged. ● When the switch is in position 1 this becomes the battery detection for RSV. The battery 2, which is isolated, be charged via VSR ensuring full charge. Cunado he is in position 2 switch, this becomes the detection battery and battery 1 will be loaded via VSR ● Simple Motorizati... Read more »

● Marine grade negative or positive Bus Bars are supplied as standard with all BEP AC/DC control panels● Features: 4 mm (5/32") stainless steel screws with shakeproof washers 2x6 mm (1/4") input stud Tin plated brass Insulated mounting base   Model Reference Output Screws 4 mm ( 5 / 32" ) Input Studs 6 mm ( 1 / 4" ) Current rating BB-6W-2S 63690L 6 1 100 A   Read more »

● Marine grade negative or positive Bus Bars are supplied as standard with all BEP AC/DC control panels ● Features: 4 mm (5/32") stainless steel screws with shakeproof washers 2x6 mm (1/4") input stud Tin plated brass Insulated mounting base   Model Reference Output Screws 4 mm ( 5 / 32" ) Input Studs 6 mm ( 1 / 4" ) Current rating BB-12W-2S 63691N 12 1 100 A   Read more »

● Marine grade negative or positive Bus Bars are supplied as standard with all BEP AC/DC control panels● Features: 4 mm (5/32") stainless steel screws with shakeproof washers 2x6 mm (1/4") input stud Tin plated brass Insulated mounting base   Model Reference Output Screws 4 mm ( 5 / 32" ) Input Studs 6 mm ( 1 / 4" ) Current rating BB-24W-2S 63692R 24 2 150 A   Read more »

Panel 2 switches Dimensions: 86mm A x 58mm H   ● Labels with green LED backlight; in red when activated ● Texts and graphics available for labels; panels and labels mix n` match ● 20Amp CC ● Water resistant according to IP56 certification Read more »

● Switches protected by a high quality neoprene rubber sleeve. ● Labels with green LED backlight ● Red LED backlight when systems are activated ● Water resistant according to IP56 certification ● Removable plate to hide the screws of the switches ● 20Amp CC ● Includes 6 switches and 3 fuse holders in line behind the panel Read more »

● Compact size panel ● In-line fuse holders with splash-proof fuses included in all compact models ● Water resistant according to the IP56 certification ● Water-resistant power outlets only in the 9003 & 9005 series panels ● 9003 includes 3 Switches and a 12VDC 10Amps socket ● 9005 includes 5 switches and a 12VDC power outlet ● 16Amps       Ref Switch colour Dimensions 69-9004WP 4 Grey 74mm... Read more »

● Compact size panel ● In-line fuse holders with splash-proof fuses included in all compact models ● Water resistant according to the IP56 certification ● Water-resistant power outlets only in the 9003 & 9005 series panels ● 9003 includes 3 Switches and a 12VDC 10Amps socket ● 9005 includes 5 switches and a 12VDC power outlet ● 16Amps       Ref Switch colour Dimensions 69-9005WPS 5 Gris 74m... Read more »

This switch offers a number of unique features, the highlight being the patented Contour Locking System, allowing it to be a stand-alone unit, or locked together with other switches. The control knob can be removed by switching to a counterclockwise 45-degree position.  Three removable side plates provide access to up to 1/0 cables. The rear cover insulates the rear terminals against any s... Read more »

Panel-mounted switches are designed specifically for panel mount applications. • Compact, lightweight • Removable key • Countersunk recesses for surface mount application • Standard 2-1/16" (52 mm) hole cut out (same as standard gauge hole) • Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictions • Standard interchange... Read more »

• Horizontal unit to be used in single outboard with a dual battery bank, single alternator with a dual battery bank, or in a twin alternator with a dual battery bank. • Two battery banks Read more »

Panel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution. • Compact, lightweight • Countersunk recesses for surface mount application • Standard 2-1/16" (52 mm) hole cut out (same as standard gauge hole) • Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictions ... Read more »

● Compact size saves space ● Clear polycarbonate covers insulate and protect on three sides ● Secure cover fixing does not interfere with wiring ● Snap-on skirts for flexible cable entry ● Rounded ends improve cable routing ● Long threaded studs for connecting up to (4) large cable lugs ● Plated brass nuts and stainless steel studs prevent thread stripping during tightening ● 4 stud and 50... Read more »

● Compact size saves space ● Clear polycarbonate covers insulate and protect on three sides ● Secure cover fixing does not interfere with wiring ● Snap-on skirts for flexible cable entry ● Rounded ends improve cable routing ● Long threaded studs for connecting up to (4) large cable lugs ● Plated brass nuts and stainless steel studs prevent thread stripping during tightening ● 3 stud and 65... Read more »

● Compact size saves space ● Clear polycarbonate covers insulate and protect on three sides ● Secure cover fixing does not interfere with wiring ● Snap-on skirts for flexible cable entry ● Rounded ends improve cable routing ● Long threaded studs for connecting up to (4) large cable lugs ● Plated brass nuts and stainless steel studs prevent thread stripping during tightening ● 5 stud and 65... Read more »