B&G

● NMEA 2000 depth/temperature sensor with zero degree element (no tilt). ● Includes a through hull housing with 51 mm plastic flanges. The sensor uses standard PGN and comes with Micro-C connectors allowing easy connection to a NMEA 2000 backbone. This sensor doesn't have a sensor connection of speed. ● Plastic through-hull housing ● 0 degree sensor ● 2 meters Micro-C c... read+

Transducer fairing for Simrad LSS HD transducers. This original spare part is designed to improve hull hydrodynamics and reduce water resistance. Its smooth surface optimizes acoustic performance and sonar signal integrity. Made of bronze for maximum durability in marine environments. Technical details Mounting fairing for Simrad LSS HD transducers Bronze material for maximum marine durability... read+

The AIRMAR IDST800L 235F transducer is a high-precision device designed for simultaneous depth and water temperature measurement. Key benefits With a frequency of 235 kHz and an 8° beam angle, it offers a narrow coverage cone for detailed resolution in deep waters. Its robust construction ensures reliability in demanding marine conditions. Integration and compatibility The model includes a ... read+

The Forward Scan transducer can be removed from its stainless steel sleeve for maintenance. Alternatively, new boats may be fitted with an empty sleeve to allow easy on-water installation of the Forward Scan transducer at a later date. Key benefits The sleeve features a self-closing valve to minimize water ingress when the transducer is first removed, but a blanking plug is required to provide ... read+

For optimal accuracy and performance, the Forward Scan transducer must be installed parallel to the waterline. This fairing block supports the level installation of the standard Forward Scan transducer, ensuring precise alignment for superior sonar performance. Key benefits The block is designed to be cut to accommodate various hull thicknesses, providing a secure fit for different boat structu... read+

This kit includes replacement O-ring seals for the Forward Scan transducer. O-rings should be checked and replaced if necessary before installing the transducer insert into its stainless steel sleeve. Key benefits This component ensures a proper seal during installation. Timely replacement of these parts guarantees equipment integrity. It ensures direct compatibility with original Forward Scan ... read+

This stainless steel sleeve allows the Forward Scan Long Stem transducer to be installed through hulls up to 47.6 mm (1 7/8 inches) thick, and at up to 28 degrees deadrise when used with a suitable fairing block. A self-closing valve allows the transducer to be installed or removed on the water; this simplifies maintenance and allows easy removal to protect the transducer while trailering or st... read+