New Products

● Polypropylene construction, shock and load resistant, impervious to fuel and acetic acid. Notches and lugs hold the hose in position, in addition, the hose must be secured with stainless steel clamps. ● Connector is easy to fit, by means of 4 screws outside ● So as to prevent water intrusion into de ventilation circuit. An extra precaution consists in building an elbow in the hose ● Dimension... read+

● Fan for autonomous ventilation system powered by solar energy (12V) read+

● This low profile handle is an easy access handle ideal for installation on doors, compartments, drawers and hatches. The handle is easy to grip even with gloves. Made in black polypropylene filled with glass with textured finish. ● Dimensions: 92 x 59 mm ● Deep: 25 mm ● Wheelbase: 76 x 40 mm read+

● Flexible grab handle for flush, flexible mounting. Can be mounted to a variety of irregular surfaces and angles on swim platform, in the cockpit and companionway. Constructed from soft polypropylene webbing over a semi-rigid core. Because of the soft, pliable webbing in these handles and the absence of any sharp edges, they are safe in areas where occupants might come in contact with them. Th... read+

 Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised water barrier. Plastic vents are corrosion-resistant, will not discolor. All collector boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross sectional area requirements.... read+

 304 stainless steel one piece welding with polished finish   # 8 screws (3.26 mm)   Dimensions: 11.1 x 26.35 x 1.9 cm ( H x L x D ) read+

De latón niquelado y tornillo autoroscante de acero inoxidable. 10 mm. de largo. Para instalar sobre materiales rígidos, madera, fibra de vidrio, etc. Debe instalarse con el código 21610100 read+

De latón niquelado y tornillo autoroscante de acero inoxidable. 10 mm. de largo. Para instalar sobre materiales rígidos, madera, fibra de vidrio, etc. Debe instalarse con el código 21610100 read+

​A full seawater-resistant polished CAF-316 self-tapping screw-stud with 4,2 * 10 mm. length thread and PZ head. Thread is designed to hold 50% better in polyester, composite, and wood. It must be installed with the code 21610100. read+

- Outer diameter: 15 mm ​- Inner diameter: 4.5 mm read+

- Outer diameter: 14 mm ​- Inner diameter: 4.5 mm read+

● Suitable for mounting tents, hoods, cushions, etc... the mounting part faces the deck, thus there are no overhang parts that can be dangerous for the feet or that can get caught up on the lines. ● Made of composite plastic anti corrosion and UV resistant. *Mounting key included *Price by unit     read+

● Suitable for mounting tents, hoods, cushions, etc... the mounting part faces the deck, thus there are no overhang parts that can be dangerous for the feet or that can get caught up on the lines. ● Made of composite plastic anti corrosion and UV resistant. *Mounting key included *Price by unit     read+

● Suitable for mounting tents, hoods, cushions, etc... the mounting part faces the deck, thus there are no overhang parts that can be dangerous for the feet or that can get caught up on the lines. ● Made of composite plastic anti corrosion and UV resistant. *Price by 10 units     read+

● Suitable for mounting tents, hoods, cushions, etc... the mounting part faces the deck, thus there are no overhang parts that can be dangerous for the feet or that can get caught up on the lines. ● Made of composite plastic anti corrosion and UV resistant. *Price by unit     read+

● Suitable for mounting tents, hoods, cushions, etc... the mounting part faces the deck, thus there are no overhang parts that can be dangerous for the feet or that can get caught up on the lines. ● Made of composite plastic anti corrosion and UV resistant. *Mounting key included *Price by 10 unit     read+

● Suitable for mounting tents, hoods, cushions, etc... the mounting part faces the deck, thus there are no overhang parts that can be dangerous for the feet or that can get caught up on the lines. ● Made of composite plastic anti corrosion and UV resistant. *Mounting key included *Price by 10 units     read+

● Eyelet intermediate between the top and base for Q-SNAP fasteners ● Made of AISI 316 stainless steel. ● The male part is equipped with a tooth to hook the female part which in turn has a special check lip. Thes two elements keep the fabric stretched and avoid its fortuitous release. *Price by unit   read+