New Products

● Fixing Kit to fasten the pump to the fresh and waste water tanks. read+

1.4 m sliding bolt track Traveller car with single shackle take off   End fittings (pair)   Plastic end caps (pair)   Pilot track & fitting instructions. read+

● Cursor aluminum stainless steel eyebolt● Length: 80 mm● Width: 42 mm● Height: 42 mm● maximum working load: 2860 kg● Tensile strength: 1430 Kg read+

● Manufactured from a composite Kevlar/Zytal material and available in 3 sizes to accept lines up to 14mm in diameter. This advanced material offers performance advantages over carbon fibre and conventional glass-reinforced resins; 'K' cams are very strong, lightweight and have excellent wear-resistance. A progressive tooth design ensures maximum holding power on all types of line, whilst ... read+

Ref Sheaves Length Width Height 81582 2 115 mm 28 mm 25 mm 81583 3 157 mm 28 mm 25 mm 81584 4 200 mm 28 mm 25 mm 81585 5 244 mm 28 mm 25 mm 81586 6 287 mm 28 mm 25 mm   read+

  ● For ropes up to 12 mm   ● Maximum Strength: 550 Kg   ● Dimensions (L x W x H): 133 x 65 x 68 mm   ● screws Diameter: 6 mm   ● Made of lightweight plastic and impact-resistant aluminum base read+

Model Ø Rope Ø Sheave Safe Working Load Breakload 14643 12 mm 35 mm 400 Kg 800 Kg 16817 16 mm 48 mm 800 Kg 1100 Kg   read+

Ref. Code Description Model Ø A 196917 Straight fitting G 1 1/2" 38 mm B 196918 90º Elbow fitting G 1 1/2" 38 mm C 196925 Straight fitting G 1 1/2" 25 mm E 196913 Straight fitting G 1 1/4" 38 mm F 196914 Straight fitting G 1 1/4" 25 mm H 196901 90º Elbow fitting G 1 1/2" 38 mm I 196902 Straight fitting G 1 1/2" 38 mm L 196904 Straight fitting G 3/4" 20 mm M 196905 90º Elbow... read+

Voltage Open Flow (GPM/LPM) Dimensions Impeller Ports Max Draw(A) 12V 12.0/45.0 11.18"x5.01"x3.85" 284x127.5x98mm Rubber & Copper 1-1/2” MNPT 1" Hose Barb 12.0 A ● Flow: 12 / 45 (gpm /lpm) ● Liquid Temperature: 140°F (60°C) Max   ● Priming Capabilities: Not needed flooded suction   ● Power: 12 amps max current draw   ● Max Pressure: Not needed   ● Inlet/Outlet Ports - Inlet: ... read+

● Perfect for storing brushes, bronzers, sponges, etc... ● Easy to mount using the brackets (99824-7), for placement on pipes, surfaces or bulkheads. ● For permanent installation use the included screws. Available in white and graphite. ● Measures (Length x height x width): 19 x 10 x 11 cm. read+

● Lever Floater for deposits of black or residual waters of 10/180 Ohms. ● Depending on the model, can serve for horizontal and vertical deposits of 40 and 60 litres. Code Height (mm) Impedance (Ohm) Suitable for 197365 150 240-33 Diablo 196911 233 Blizzard - Diablo 197367 350 For custom made tank 196909 480 Zefiro 40 lt 196910 690 Zefiro 60 lt   read+

♦ Sika Cleaner-205 is manufactured according to ISO 9001/14001 standard quality assurance and environmental protection. Areas of Application: ♦ Sika Cleaner 205 is used to clean and activate the following non-porous substrates: metals, plastics, ceramics screenprints, painted surfaces. read+

Bivalent operation with heat exchanger or 1200W 220V electric resistance. Driven insulation between tank and polyethylene foam body to keep water hot for at least 123 hours. Overdimensioned copper heat exchanger provides an actual performance exceeding the competitor's products yielding double capacity by far. Horizontal and vertical mounting  Safety valve calibrated at 4 bar, 8 bar testin... read+

♦ Horizontal or vertical installation. Polyurethane foam insulation for less heat dispersion. With safety valve and winter drain easily. Coil heat exchanger, tank and fittings in stainless steel AISI 316. Sheath and brackets in stainless steel AISI 304. read+

● Engine version. Very practical shape, offers very little resistance to wind and is very easy to install. ● Length: 56 cm ● Diameter: Ø 10 cm ● Weight: 1100 gr ● Reflective surface: 4 m2 read+

Balde de hierro galvanizado en color rojo. Contra incendios. read+

● Fresh water deposit for installations in horizontal version. It is a deposit of high quality, very light and easy to install. It is the ideal solution for storing drinking water from your boat. ● The kit is composed of: Drinking water tank 12.5 L vacuum pump. Kit's connectors.   ● Optional fittings: 196901 Code Model Capacity (lt) L/min L (mm) H (mm) H1 (mm) W (mm) Ø A SL (mm) SH (mm) S... read+

● Fresh water deposit for installations in horizontal version. It is a deposit of high quality, very light and easy ninstalar. It is the ideal solution for storing drinking water from your boat. ● The kit is composed of: Drinking water tank 8 L vacuum pump. Kit's connectors. Code Model Capacity (lt) L/min L (mm) H (mm) H1 (mm) W (mm) Ø A SL (mm) SH (mm) SW (mm) Angle 196895 Bora 40 40 ... read+

● Sewage deposit for installations upright in high-density polyethylene, very lightweight and easy to install. ● Gravity discharge: when the installation is performed in 0.5 m above the waterline, without pump tank can be emptied, can also be mounted in an enclosure Code Model Capacity (lt) L1 mm L2 mm H mm H1 W Ø A 196881 Zefiro 40 40 400 302 493.7 540 250 133.5 196882 Zefiro 60 60 4... read+