Mounts and accessories

Our standard 1" outside diameter mast mount with thread allows you to mount your compatible antenna and pass a Garmin Marine Network 2.0 cable through the mast. Read more »

Mount your GPS 24xd or GA 38 receiver or antenna with this base mount. Read more »

The 1'' threaded pole mount allows you to mount your compatible device and route an audio/NMEA 2000® cable through the pole.  Read more »

The PI-1 is a 12V power inserter/splitter suitable for the Wave antenna. • Both outputs can be connected either to a TV or to a radio FM. • The PI-1 is supplied along with a fused power cable, fuse holder and a 250mA fuse. Read more »

The PI-2 is a car cigarette lighter, 12/24V plug with 3A fuse. Jack 5.50 x 2.10 mm, cable length 1,8m. Indicated to power 12V devices such as Sea-Hub, Sea-Boost and Rocket. Read more »

This adapter is the suggested optional for installing the Scout SIM injector in a hidden position (e.g. behind a wall/panel). It provides a 20cm length flexible tape with SIM card connector and a secure IP67 cap to protect the SIM card slot. • Requested mounting hole of M21 with cutoff 19.2 mm. Read more »

● Install your antenna under a fiberglass surface with this bracket.     [list_down title = "Compatible Devices"] AIS ™ 600 GA ™ 38 GPS / GLONASS antenna GA ™ 30 GPS Antenna GPSMAP® 8500 black box GPSMAP® 8530 black box GPS 17x HVS GPS 19x HVS (NMEA 0183) GPS 19x NMEA 2000® GPSmap® 4008 GPSmap® 4010 GPSmap® 4012 GPSmap® 5008 GPSmap® 5012 GPSmap® 5015 GPSMAP® 6008 GPSMAP® 6012 GPSMAP® 7012 GPSMA... Read more »

● Designed for mounting 2kW and 4kW Enclosed Radar Antennas or a Raymarine 37STV Satellite TV Antenna on the mast of the boat. ● It has 12 fixing points that guarantee total support. ● Material: Made of aluminum. ● Compatible with 18" radome antennas (Quantum, Garmin, Simrad and KVH) ● Includes cable glands: No     Read more »

Cigarette lighter power supply for router model Sea-Hub Plus. Cable length 150 cm.   [list_down title = "Technical Specifications"] • Input voltage 9-30 VDC • Input connector: 12/24 VDC • Output connector: 4-pin, 3mm pitch • Maximum current: 2A • Input protection: Fuse • Cable: 2×0.5mm² ,1500 mm • Code: PF AC AMP04 [/list_down] Read more »

Power cable with 4-way screw terminal for router model Sea-Hub Plus. Cable length 200 cm.   [list_down title = "Technical Specifications"] • Input voltage 9-30 VDC • Output connector: 4-pin, 3mm pitch • Color coding:  - Red = Power +    - Green = Input/Output/NC    - White = Input/Output/NC • Cable: 4×0.129 mm2 (26 AWG), 2000 mm • Code: PF AC... Read more »

This splitter is a 2-way coaxial splitter suitable for signals distribution from 5 to 2150 MHz. It divides the signal so as to obtain the same attenuation on all outputs (-4 dB). Realized in die-casting box with input and output connectors F type. It has the DC by-passed and it’s compatible with the signals for the return line. Read more »

This splitter is a 3-way coaxial splitter suitable for signals distribution from 5 to 2150 MHz. • It divides the signal so as to obtain the same attenuation on all outputs (-7,8 dB). • Realized in die-casting box with input and output connectors F type. • It has the DC by-passed and it’s compatible with the signals for the return line.   Read more »

Power over Ethernet POE adapter 12V/1A. ​• It includes 1 unit EU power supply 12 VDC. Read more »

Din rail kit for router model Sea-Hub Plus.   [list_down title = "Technical Specifications"] • Mounting standard: 35 mm DIN rail • Material: Low carbon steel • Weight: 57 g • Dimensions: mm 82 x 46 x 20 [/list_down] Read more »

Compact Din rail kit for router model Sea-Hub Plus. [list_down title = "Technical Specifications"] • Mounting standard: 35 mm DIN rail • Material: ABS + PC plastic • Weight: 6,5 g • Dimensions: mm 70 x 25 x 14,5 [/list_down] Read more »

Surface mounting kit for router model Sea-Hub Plus. [list_down title = "Technical Specifications"] • Mounting standard: Flat surface • Material: ABS + PC plastic • Weight: 2 x 5 g • Dimensions: mm 25 x 48 x 7,5 [/list_down] Read more »

Scout Cable Type LMR-240 Connector N Male/SMA Male RP 5 m. Read more »

The SIM Extender can be placed in a position convenient for the user to insert the SIM card and does not require any power cable as it gets power directly through the Ethernet cable. Thanks to Scout SIM Extender it is no longer necessary to access the on-board router to manage the SIM card, this is a particularly useful advantage especially when the Dome is located in a place that is difficult ... Read more »

Two way stainless steel ratchet rail mount.   The PA-45 is a heavy duty stainless steel AISI 316 casted rail mount for 22 to 25 mm rails. The quick release lever allows the antenna to fold-down and set it with the requested angle in a stable position. Highly polished finish, standard 1” x 14 thread with hole for coax cable pass-through. • Material: Stainless steel AISI 316 • We... Read more »