Vetus

Long Exhaust System Sometimes an exhaust line is so long that it requires a large capacity collector to prevent water from returning to the engine.   LSSA type For standard type connections ● Suitable for exhaust pipe with internal diameter of Ø40, 45 or 51 mm ● Input and output connections adjustable 360º ● 1 fixing strap is supplied   Ref Capacity (liters) A (mm) B... Read more »

Long Exhaust System Sometimes an exhaust line is so long that it requires a large capacity collector to prevent water from returning to the engine.   LSSA type For standard type connections ● Suitable for exhaust pipe with internal diameter of Ø40, 45 or 51 mm ● Input and output connections adjustable 360º ● 1 fixing strap is supplied     Referencia Capacity (litres) A (mm) B (mm) ØC (mm)  Ø... Read more »

● The body of this collector / silencer consists of 2 rotating cameras and fully adjustable tube connections, which guarantees a simple installation and saves time in a wide range of applications. ● Suitable for Ø40, 45, 51 mm inner diameter tubes   Ref Capacity (liters) A (mm) B (mm) ØC (mm)  ØD (mm) NLPH40 3 652 400 110 40 NLPH45 3 652 400 110 45 NLPH50 3 652 400 110 50 Read more »

● Due to its unique three-camera technology it has an incredible sound reduction of 10db more than traditional collectors. Its rotating tubes and tube connections ensure quick and easy installation even in the smallest spaces. ● Suitable for Ø40, 45, 50 mm inner diameter tubes   Ref Capacity (liters) A (mm) B (mm) ØC (mm)  ØD (mm) NLP340 5 772 520 110 40 NLP345 5 772 520 110 45 NLP350 ... Read more »

● Due to its unique three-camera technology it has an incredible sound reduction of 10db more than traditional collectors. Its rotating tubes and tube connections ensure quick and easy installation even in the smallest spaces. ● Suitable for Ø60, 75, 90 mm inner diameter tubes   Ref Capacity (liters) A (mm) B (mm) ØC (mm)  ØD (mm) NLP360 13 1050 670 155 60 NLP375 13 1050 670 155 75 NLP... Read more »

● Specially developed for fast boats with powerful engines ● Only to exhaust systems with water injection ● Huge exhaust noise reduction with minimal back pressure ● Made with light and synthetic materials ● For tube diameters of Ø90, 100, 125 and 150 mm ● Stainless steel fixing bands AISI 316 ● Temperature sensor for water alarm is optional   Ref Ø D ... Read more »

Type NLPG The combination of functions saves time and installation space, maintaining the essential qualities of a good exhaust system with negligible back pressure. The swan neck prevents the return of water from filling the exhaust and the muffler creates an additional mixture to reduce exhaust noise.   Specifications Suitable for exhaust pipe with internal diameter of Ø40, 45, 51   Ref Ca... Read more »

Type NLPG The combination of functions saves time and installation space, maintaining the essential qualities of a good exhaust system with negligible back pressure. The swan neck prevents the return of water from filling the exhaust and the muffler creates an additional mixture to reduce exhaust noise.   Specifications Suitable for exhaust pipe with internal diameter of Ø60, 75, 90   Ref Ca... Read more »

● Rubber-polyurethane coating inside ● Resin on the outside ● Rubber bearings with measures of axis (A) in mm and outside (B) in inches. Length (C) in mm   Resin A B** C RULAG25PH 20 1 1/4 100 RULAG30PH 30 1 3/4 120 RULAG35PH 35 1 7/8 140 RULAG40PH 40 2 1/8 160 RULAG45PH 45 2 3/8 180 RULAG50PH 50 2 5/8 200 RULAG60PH 60 3 240 RULAG70PH 70 3 1/2 280 RULAG8... Read more »

● Rubber-polyurethane coating inside ● Brass on the outside ● Bearings with Shaft dimensions (A) in mm and outside (B) in mm. Length (C) in mm   Brass A B C RL2540 25 40 100 RL3045 30 45 120 RL3550 35 50 140 RL4055 40 55 160 RL4565 45 65 180 RL5070 50 70 200 RL6080 60 80 240 RL7090 70 90 280 RL8010 80 100 320 RL9011 90 110 360 RL1012 100 125 400 &... Read more »

● Rubber-polyurethane coating inside ● Brass on the outside ● Bearings with Shaft dimensions (A) in mm and outside (B) in mm. Length (C) in mm   Resin A B C RL2540PH 25 40 100 RL3045PH 30 45 120 RL3550PH 35 50 140 RL4055PH 40 55 160 RL4565PH 45 65 180 RL5070PH 50 70 200 RL6080PH 60 80 240 RL7090PH 70 90 280 RL8010PH 80 100 320 RL9011PH 90 110 360 RL1... Read more »

● This trap is made of synthetic materials and is interchangeable with the AIRVENT type due to the fact that it has fixing holes. It has an anti-siphon pressure valve and is self-contained. ● Connection to Ø38 mm tube and is ideal for toilets or storage tanks to be installed below the waterline ● Width 138 mm ● Height 107mm ● Depth 48 mm   ● Depth 68mm Read more »

For marine engines and generators ● Double function: separate the cooling water injected into the exhaust and also act as a gooseneck, which provides an excellent attenuation of exhaust noise ● 360º adjustable tube connections ● Drain for 38 mm or 51 mm cooling water ● Support made of stainless steel AISI 316 with synthetic belts   Ref A (mm) B (mm) Ø D (mm) Capacity (liters) LGS4038 406 x... Read more »

For marine engines and generators ● Double function: separate the cooling water injected into the exhaust and also act as a gooseneck, which provides an excellent attenuation of exhaust noise ● 360º adjustable tube connections ● Drain for 38 mm or 51 mm cooling water ● Support made of stainless steel AISI 316 with synthetic belts   Ref A (mm) B (mm) Ø D (mm) Capacity (liters) LGS6050 540 x... Read more »

● An obstruction in the water intake of the engine or a damaged pump impeller results in a complete loss or severe reduction in the volume of cooling water of the exhaust system. In this case, the exhaust temperature will increase much faster than the engine temperature. Vetus always recommends placing an exhaust temperature alarm that provides visual and audible warning when the temperatu... Read more »

The exhaust hull outlet made of flexible EPDM rubber is fixed on the outside of the helmet by means of a 2 mm thick AISI 316 stainless steel ring. The mufflers and VETUS gooseneck with the corresponding diameters fit directly into the rubber handle. A SLVBR or SLVBG type plastic splice is required to connect the exhaust pipe.   Ref For exhaust pipe (int Ø) (mm) A = measure hole Ø (mm) ØB (mm... Read more »

● Manufactured in stainless steel AISI 316 ● Integrated retention cover   Ref For exhaust pipe (int Ø) (mm) A = measure hole Ø (mm) ØB (mm) C (mm) TRC40SV 40 41 74 75 TRC45SV 45 46 79 75 TRC50SV 50 51 84 75 TRC60SV 60 61 94 75 TRC75SV 75 77 110 90 TRC90PV 90 91 123 110 TRC100SV 102 103 140 115 TRC125SV 127 128 169 140 TRC150SV 152 153 194 150 Read more »

● Made of black synthetic material reinforced with fiberglass and decorative band in stainless steel AISI 316 ● The exhaust pipe can be connected directly to this exhaust hull outlet   Ref For exhaust pipe (int Ø) (mm) A = measure hole Ø (mm) ØB (mm) C (mm)  TC090  90 93 141 110 TC100 102 103 155 115 TC125 127 128 178 140 TC150 152 153 203 150 Read more »

Straight and suitable model for pipes with an internal diameter of Ø40 mm to 150 mm   Ref Type ØD mm SLVBR40K straight 40 SLVBR45K straight 45 SLVBR50K straight 50 SLVBR60K straight 60 SLVBR65K straight 65 SLVBR75K straight 75 SLVBR90K straight 90 SLVBR100K straight 100 SLVBR110K straight 110 SLVBR125K straight 125 SLVBR150K straight 150 Read more »

● Curve and suitable model for pipes with an internal diameter of Ø40 mm to 150 mm ● PVC material ● 60º curve   Ref Type ØD mm SLVBG40K curve 40 SLVBG45K curve 45 SLVBG50K curve 50 SLVBG60K curve 60 SLVBG65K curve 65 SLVBG75K curve 75 SLVBG90K curve 90 SLVBG100K curve 100 SLVBG110K curve 110 SLVBG125K curve 125 SLVBG150K curve 150 Read more »

● Allows the desired routing of the exhaust line ● Siynthetic material ● 90º curve   Ref Type ØD mm ELB90127 curve 127 ELB90152 curve 152 ELB90203 curve 203 ELB90254 curve 254 Read more »

Minimize noise caused by vibrations generated in the collector   Referencia Description MGVIB45 Anti vibratory support for MGP collection up to 35 kg MGVIB55 Anti-vibration support for MGS and MGL collectors up to 65 kg Read more »

In some vessels, the exhaust manifold must be placed so close to the water injection point of the engine's exhaust elbow (this is especially true in the case of horizontal exhaust systems), that this water can not always be mixed properly with the exhaust gases. very hot, often causing the tube and / or silencer to overheat. The installation of a water mixer directly behind the exhaust elbow is... Read more »

The ultrasonic level sensor measures the fluid level of the tanks without touching it. The sensor is suitable for drinking water, fuel (both diesel and gasoline) and dirty water (both sewage and gray water) and can be used together with all Vetus level meters and with the control panel for dirty water (WWCP ). When the power is on, the LED above the sensor is always flashing green!   Delivery c... Read more »

Ultrasonic level sensor 12 / 24V, bus technology, to indicate water level, fuel and wastewater.   ● Voltage: 12 and 24 V DC ● Interface: Bus (RS485 bus) ● Current consumption: 35 mA ● Max tank bottom: 120 cm ● Presicion: +/- 5% ● Temperature range: -20 to + 70ºC ● Casing: SAE, 5 holes ● Dimensions: Ø 77 x 23 mm Read more »

● The VETUS ultrasonic fluid level sensor, type SENSORB, measures the fluid level in any tank shape of your boat, regardless of its dimensions, but with a maximum depth of 120 cm, without any contact (not recommended in tanks of metal). This device is suitable for the following liquids: gasoline, diesel, drinking water, gray and black sanitary water. The sensor can be calibrated using the level... Read more »

● The Vetus GD1000 gas detector offers a gas detection system for a range of combustible gases, including propane, butane, methane and hydrogen. In addition it will also detect poisonous carbon monoxide. ● A single sensor is supplied as standard, which can detect both flammable gases (such as bottled gas) and carbon monoxide. A second sensor can be fitted (as an extra) for gas detecti... Read more »

● Additional sensor for gas detection ● Gasoline vapors, Carbon monoxide Read more »

● Front panel Ø 63 mm ● Bottom 90 mm ● Installation hole Ø 52 mm ● Compatible with other VETUS bow propeller panels and the round ring corresponds to other instruments for VETUS vessels ● Available in complete or compact version ● They are watertight and equipped with a switched socket to connect extra equipment (max 3 A) ● It incorporates operation in the cas... Read more »

● Front panel Ø 63 mm ● Bottom 90 mm ● Installation hole Ø 52 mm ● Compatible with other VETUS bow propeller panels and the round ring corresponds to other instruments for VETUS vessels ● Available in complete or compact version ● They are watertight and equipped with a switched socket to connect extra equipment (max 3 A) ● It incorporates operation in the cas... Read more »