New Products

● Aluminum ● Compatible with Alpha One Gen II units. read+

● Black EDP paint: this painted fin does not perform any anodic function. ● Compatible with most Mercury / Mariner outboards with 35 hp and above, and all MerCruiser except Bravo. ● Check that there is a corresponding clearance in the propeller before operation. read+

● Air ventilation with rotating connector ● This ventilation grille is suitable for an engine up to 16 hp. For a 60 hp engine 4 grids (2 on port and 2 on starboard) will be needed. ● It is made of stainless steel and has a synthetic rotating elbow that works as a water separator. ● Area of air flow is 0.66 dm2 ● Hose not included read+

For ventilation gates All aeration portlets can optionally be supplied with a synthetic water separator (except ASVREC type)   Ref Specification DBOX020 Water separator for ASV, SSV, SSVL, tipo 20 DBOX025 Water separator for  ASV, SSV, SSVL, tipo 25 DBOX030 Water separator for ASV, SSV, SSVL, tipo 30 DBOX040 Water separator for  ASV, SSV, SSVL, tipo 40 DBOX050 Water separator for  ... read+

● Suction tube, very flexible pressure ● This tube can connect the MOFI ventilation box to the type 178 exhaust fan ● Roll 30 m, price per meter   Type Description Interior Ø mm Exterior Ø mm  Weight kg/m  VHOSE178 abstract, fan 180 186 0,2 VHOSE178N abstract, fan, soundproof 180 186 0,2 read+

● Suction tube, very flexible pressure ● This tube can connect the MOFI ventilation box to the type 178 exhaust fan ● Roll 30 m, price per meter   Type Description Interior Ø mm Exterior Ø mm  Weight kg/m  VHOSE152 extract, fan 152 158 0,2 read+

● In addition to combustion air, the engine also requires sufficient ventilation air to dissipate residual heat. The required volume of ventilation air is approximately the same as the necessary combustion air that is apox. 6.1 m3 per kW (4.5 m3 per cv) per hour based on a maximum air velocity of 3 m / sec. The design of are based on these principles.   ● This type has an anodized polished alum... read+

In addition to combustion air, the engine also requires sufficient ventilation air to dissipate residual heat. The required volume of ventilation air is approximately the same as the necessary combustion air that is apox. 6.1 m3 per kW (4.5 m3 per cv) per hour based on a maximum air velocity of 3 m / sec.  Both the frame and the grilles are made of polished high-gloss stainless steel ... read+

● In addition to combustion air, the engine also requires sufficient ventilation air to dissipate residual heat. The required volume of ventilation air is approximately the same as the necessary combustion air that is apox. 6.1 m3 per kW (4.5 m3 per cv) per hour based on a maximum air velocity of 3 m / sec.  ● This type is made of stainless steel with anodized aluminum grids &nbs... read+

● In addition to combustion air, the engine also requires sufficient ventilation air to dissipate residual heat. The required volume of ventilation air is approximately the same as the necessary combustion air that is apox. 6.1 m3 per kW (4.5 m3 per cv) per hour based on a maximum air velocity of 3 m / sec. The design of are based on these principles.   ● This type has an anodized polished alum... read+

Complete set: stainless steel screw, male cover ring and fixing wrench   Tipo Descripción RING75 Ring and screw AISI 316 for air intake DONALD, JERRY, TRAMON and LIBEC RING100 Ring and screw AISI 316 for air intake TOM and CHINOOK RING125 Ring and screw AISI 316 for air intakeYOGI and SAMOEN read+

● Can be mounted invisibly on covers up to 25mm thick ● They can be mounted on the water separator using a counter frame and then screwed into the cover ● Manufactured with high gloss polished stainless steel AISI 316 and adapted to stainless steel air intakes and water separators   Type Indicated for A Ø mm B Ø mm C Ø mm Thickness mm BOXAD75 BOX75, BOXS75 167 95 5.2 6 BOXAD100 BOX100, B... read+

● Synthetic Box ● Drain any water that enters the boat from the air intake and can be completely closed by the built-in mushroom aerator. The cover nut is frabriada with synthetic material or stainless steel and can be easily mounted on the separators by means of the screws and nuts that are supplied. ● Not suitable for S-type air intakes ● Water separator for YOGI and SAMOEN Free Flow Area Cm2... read+

● Synthetic Box ● Drain any water that enters the boat from the air intake and can be completely closed by the built-in mushroom aerator. The cover nut is frabriada with synthetic material or stainless steel and can be easily mounted on the separators by means of the screws and nuts that are supplied. ● Not suitable for S-type air intakes ● Water separator for TOM and CHINOOK ● Free Flow Area C... read+

● Synthetic Box ● Drain any water that enters the boat from the air intake and can be completely closed by the built-in mushroom aerator.    The cover nut is frabriada with synthetic material or stainless steel and can be easily mounted on the separators by means of the screws and nuts that are supplied. ● Not suitable for S-type air intakes ● Water separator for DONALD, JERRY, TRAMON, LIBEC ● ... read+