New Products

● Absorption of high and low frequencies of sound and vibrations ● Self-adhesive and have an aluminum front layer   Specifications ● Dimensions 120 cm x 80 cm x 40 mm ● Weight per plate 5.6 kg ● Resistance to temperatures up to 140ºC read+

• Set of 15 units • The filter element has a capacity of 320 grams, which is the average amount of oil in 8,000 liters of bilge water. • Replacement for oil-water separator to drain BISEP19 read+

● Collect and remove oil and grease from the bilge water ● It has a replaceable filter element with a capacity of 320 grams. It can retain 95% of the oil in the bilge water. The bilge pump used in combination with this filter has a maximum capacity of 25 liters / min. ● Replacement of separator: BISEP19FE   Specifications ● Connections for Ø 19 mm tube ● Dimensions... read+

● Easy interconnection ● With these connecting pieces, interconnect 2 filters of the type 330/32 or 470/32 with a maximum capacity of 460 L / min. ● Type 470 can not be oriented when this equipment is used read+

● All VETUS water filters have a transparent lid that allows you to inspect the filter without opening it. Cleaning the flitro is rarely necessary, but if necessary it can be quick and easy. ● Install the water filter always above the waterline. Only the CWS type, the metal filter, can be installed below the waterline. Always install the step valve after the water intake.   &nbs... read+

● All VETUS water filters have a transparent lid that allows you to inspect the filter without opening it. Cleaning the flitro is rarely necessary, but if necessary it can be quick and easy. ● Install the water filter always above the waterline. Only the CWS type, the metal filter, can be installed below the waterline. Always install the step valve after the water intake.     ● This filter has... read+

● All VETUS water filters have a transparent lid that allows you to inspect the filter without opening it. Cleaning the flitro is rarely necessary, but if necessary it can be quick and easy. ● Install the water filter always above the waterline. Only the CWS type, the metal filter, can be installed below the waterline. Always install the step valve after the water intake.   This type is suppli... read+

● All VETUS water filters have a transparent lid that allows you to inspect the filter without opening it. Cleaning the flitro is rarely necessary, but if necessary it can be quick and easy. ● Install the water filter always above the waterline. Only the CWS type, the metal filter, can be installed below the waterline. Always install the step valve after the water intake.   &nbs... read+

● All VETUS water filters have a transparent lid that allows you to inspect the filter without opening it. Cleaning the flitro is rarely necessary, but if necessary it can be quick and easy. ● Install the water filter always above the waterline. Only the CWS type, the metal filter, can be installed below the waterline. Always install the step valve after the water intake.     Specifications ● ... read+

● For marine diesel engines from 70 to 350kW (95-480 hp) ● This type is designed with special attention to the perso-power ratio of modern diesel engines. The weight of an engine, in comparison with its empujke has been reduced more and more. The LMX type guarantees optimal damping of vibrations even at idle. It has a very high stern horizontal projection that allows the administration of great... read+

● For heavy duty engines with 4 or more cylinders ● This type is extradaddy suitable for the application in diesel marine engines of the power range between 30 and 125 kW (4-170 hp), by virtue of low vertical rigidity combined with high rigidity in the longitudinal direction   Ref Stiffness ratio Min. load kg Min. compression mm Max. load kg Max. compression mm Hardness in ° ... read+

● For small engines and generators with 1 or 2 cylinders ● These flexible motor supports contain a special rubber compound with excellent cushioning properties of the vibrations. They are suitable for marine engines in a power range between 4 and 15 kW (6-20 hp).   STIFFNESS RATIO - VERTICAL 1 STIFFNESS RATIO - ATHWARTSHIPS 1.4 STIFFNESS RATIO - FORE AND AFT 1.4 MIN... read+

This hydraulic shock absorber is a combination of a conventional rubber and metal shock absorber and a hydraulic shock absorber. It has a maximum load of 67 kg.   Designed especially for 1, 2 or 3 cylinder engines that produce numerous horizontal and vertical movements, the VETUS hydro damper is an absolute sensation: the reduction of vibrations and noise is truly amazing. The maximum stat... read+