Specials

● VETUS single lever remote control for side mounting, with stainless steel (AISI 316) handle, black plastic housing and red knob. With neutral safety switch. ● The SICO single lever remote control features throttle advance in neutral facility, plus pre-installed 'start in gear' protection micro switch for sports boats. The handle friction is adjustable. The push-pull cables may be installed bo... read+

Twin lever remote control for top mounting with high-gloss polished stainless steel handles and housing.   Length (mm) Width (mm) Height (mm) Handle length  (mm) Mechanism Deph  (mm) 162 200 237 200 208 read+

Type K40 has a relatively soft, rubber compound which fulfils the requirements of light-weight vessels with a modern 3-cylinder marine diesel engine. The rubber elements create an optimum in vibration dampening. Type KSTEUN40 features internal buffers which limit the engine movements when started or stopped. It is also secured against overload and shearing off.   STIFFNESS RATIO - VERTICAL 1... read+

● For small engines and generators with 1 or 2 cylinders ● These flexible motor supports contain a special rubber compound with excellent cushioning properties of the vibrations. They are suitable for marine engines in a power range between 4 and 15 kW (6-20 hp).   STIFFNESS RATIO - VERTICAL 1 STIFFNESS RATIO - ATHWARTSHIPS 1.4 STIFFNESS RATIO - FORE AND AFT 1.4 MIN. LOAD (KG) - STATIC... read+

● This trap is made of synthetic materials and is interchangeable with the AIRVENT type due to the fact that it has fixing holes. It has an anti-siphon pressure valve and is self-contained. ● Connection to Ø38 mm tube and is ideal for toilets or storage tanks to be installed below the waterline ● Width 129 mm ● Height 107mm ● Depth 48 mm   ● Depth 68mm read+

With hand-polished and anodised frame with rounded corners with 32 or 55mm radius and a 10mm thick dark smoked acrylic cover. The exhaust and deck hatches come with adjusters that allow the lid to remain open at almost any angles up to 90º. A special friction hinge allows the ventilation hatches to remain open at any angle up to 180º. The LIBERO type is suitable for designs of category A, zone ... read+

● The small cabins of the boats should ventilate adequately. This is very important when the temperature drops to keep the air humidity inside and outside as equal as possible. This is to avoid condensation and its devastating effects. ● They are made of stainless steel with polished shell of high gloss. They can not be closed, thus ensuring permanent ventilation. Translucent ●&n... read+

●  This model is a successor to the very popular ILT120, a large inspection port for petrol and (bio) diesel tanks. By improving the design of the lid and reinforcing the material with glass fibre, this model now meet the ISO 21487 standards in addition to ISO 10088! ●  Specifications: ● Viton gasket set for use with petrol or (>10% bio) diesel fuel ● Internal a... read+