Register and take advantage of the discounts and advantages of being a Professional of Nautical
Join the more than 500 Nautical Professionals now
We are sorry, but this product is discontinued and will not be available for purchase again.
● Visualize live incredibly detailed and very easy to interpret probe images, both structures, baits and fish that are under and around the boat. All this in real time, even when the boat is stopped
● Easily adjust the transducer to adapt it to your fishing techniques; Orient it forward to observe the elements that surround the boat or down to know what is just below it
● Visualize incredibly sharp probe images in real time at up to 60 meters distance and depth
● The attitude and heading reference system (AHRS) stabilizes the probe view on the plotter's screen, even in heavy seas conditions
● The simple plug-and-play connector for Garmin network makes installation easy
● Compatible with GPSMAP 8400, GPSMAP 7400, 1022/1222, GPSMAP 723/923/1223, 722/922/1222 Plus and 722/922/1222 Touch, ECHOMAP Ultra, Plotter/Sounder combination series ECHOMAP UHS and ECHOMAP Plus 72CV/72SV/92SV
Clearly, it is the most incredible probe technology so far. Your fishing experience had never been better. Panoptix LiveScope is a real-time scanning probe that allows you to see very easy-to-interpret scanning probe images from fish that swim nearby, as well as clearly defined structures. You can even see the hook while you recover it. Also, it is not necessary for the boat to be in motion. These images are so sharp and precise that, with a little practice, you can even distinguish between different species of fish.
Two modes in a single transducer
You'll get the LiveScope modes down and LiveScope forward in a single transducer. Adjusting the transducer mode to adapt it to your fishing techniques is very simple; Use LiveScope forward to see incredibly sharp images of the structures and fish that surround the boat, and LiveScope down to find out what's right below. The view is automatically updated on your Garmin compatible plotter. The stabilization function of the AHRS system keeps the probe sight stable even in heavy seas conditions.
The downward LiveScope mode allows you to see incredibly detailed and very easy to interpret probe images, both of the structures and the fish under the boat, with exceptional clarity and at a distance of 61 meters, even when the boat is stopped.
Physical and performance characteristics
Dimensions of the unit (Width / Height / Depth) | GLS 10 probe module: 24.5 x 14.9 x 6.5 cm; LVS32 transducer: 13.7 x 9.7 x 4.6 cm |
Weight | GLS 10 probe module: 2.0 kg; LVS32 transducer: 0.9 kg |
Waterproof | IPX7 |
Ports Garmin Marine Network | 1 (small connector) |
Temperature range | In operation: -15 ° C to 70 ° C; Off: -40 ° C to 85 ° C |
Probe specifications and functions
Frequency | 530 - 1.100 kHz |
Weight | Potency of transmission |
Max deep | Down and forward: 61.0 m |
Eléctrical
Power input | 10-32 V |
Electric consumption
|
Typical 21 W; max. 58 W |
Fuse | 7,5 A |
● LiveScope GLS 10 probe module
● Panoptix LVS32 transducer
● Support for electric drive motor drum
● Support for electric drive motor shaft
● Stern mirror support
● Charger / data cable
● Garmin network cable 2 meters, small connector
● Network adapter cable
● Assembly components
● Documentation