New Products

Your TEMO·450 comes with a basic oarlock fitting that screws permanently to the transom. If you’d rather avoid a permanent install, or you want to use the same motor on more than one boat, this removable oarlock fitting is the perfect upgrade. It can be installed and removed in seconds, while keeping the same features and benefits as the original fitting. Key specs - Length: 15 cm - Width: 10 c... read+

Spare kit: ASDV valves. • For VETUS air vents with valves (ASDV/ASDH), it is recommended to replace the valve every 2 years. • The VETUS ASDVS replacement valve kit includes 4 valves and a nozzle brush. read+

Keep your TEMO·450 ready to go with the official 110–230V charger, designed specifically for the TEMO·450 and included with the motor. With 116W of charging power, it can fully recharge the battery in about 3 to 3.5 hours, using roughly 0.37 kWh per full charge. Highlights - 110–230V input for standard household/shore power outlets - 116W charging power - Full charge in ~3–3.5 hours -... read+

Secure your TEMO·450 when you step off the boat. The TEMO·450 anti theft device is an essential accessory designed to be simple to use while helping protect your motor without hassle. Made from steel and wrapped in a protective rubber coating, it helps prevent scratches on the TEMO·450 tube. For extra protection, you can even use it while the mo... read+

Tube with silicon grease used for all ZWB and ZWBH propeller shaft bearing/seals. read+

Even though the TEMO·450 is waterproof (IP67), it will sink immediately if it slips into the water. The TEMO·450 Flotation Kit is designed to bring the motor back to the surface so you can recover it quickly, giving you extra peace of mind during installation and day to day handling. In real use: if the motor drops from the stern area, it won’t submerge and will stay on the surface. If it falls... read+

Keep your TEMO·450 protected and easy to carry with this purpose built transport and protection bag. It’s designed specifically for the TEMO·450, making it simple to move thanks to its carry handle, while helping protect your motor from bumps and scratches during transport or storage. Built for real marine use, the bag is reinforced at both ends and features a YKK zipper suited for salty enviro... read+

This flexible self-aligning bronze inner bearing used in this system features a double sealing lip as double protection against water ingress.  Type Shaft diameter H L D d ZWB25I 25 mm 112 mm 144 mm 43 mm 25 mm ZWB30I 30 mm 112 mm 144 mm 49,5 mm 30 mm ZWB35A 35 mm 112 mm 145 mm 56 mm 35 mm ZWB40A 40 mm 114 mm 150 m... read+

The Nano toilet combines the comfort of a full-size seat with the lowest height dimensions on the market without sacrificing reliability and performance. • 24 V • Remains quiet like all Tecma toilets. • Key feature: height of only 295 mm. • White color, ceramic bowl made in Italy, thermoset plastic lid that conceals the seat. • “Eco Rocker switch” control panel included. • Complete solenoid val... read+

For generic tables. • Made of anodized aluminum. • The column screws into the base with a clever "Thread lock" system, extremely stable. • The base attaches to the floor without embedding, with only a 20 mm protrusion. • Color: black • Column diameter: 60 mm • Height: 689 mm read+

No top base, fits directly into the table mounts 48.417.50, 48.417.51, 48.417.52. • Made of anodized aluminum. • The column screws into the base with a clever "Thread lock" system, extremely stable. • The base attaches to the floor without embedding, with only a 20 mm protrusion. • Color: black • Column diameter: 60 mm • Height: 685 mm read+

Positions the soft handle perfectly at hip height for easy use. • 360° rotation of the transducer • Fully foldable for storage and minimal space • 1 Hexx base included • Storage bag included (Hexx Live Pole 60 only, 41.412.00)   Reference Railblaza Cod. Load Capacity Mount 41.412.00 11-4174-11 3 kg 90º Rotation + 180º Tilt 41.412.10 11-4175-11 5 kg 90º Rotation read+

Fastening with two screws on panels 6-16 mm thick, complete with snap closure. • Material: nylon and stainless steel. • Dimensions: 63 x 63 mm • Hole in base: 50 mm • Stop travel: 27 - 50 mm read+

Heavy-duty aluminum oars with UV-resistant polypropylene blades. Two-section design for easy storage without compromising strength. Complete with rowlock sleeve. Sold in pairs. read+

Dual mounting option: on wall or with bracket. Possibility to mount the ventilation hose both on the inlet and on the outlet. Anti-corrosion ABS housing. Complies with CEI EN50014-1 and N61000-3-3 standards for electric motors operating in potentially explosive environments. • Voltage: 12V • Flow rate: 220 m³/h • Current draw: 2.5 A • Outlet: Ø 76 mm • Dimensions: 160 x 160 x 196 mm • Optional... read+

Optimal vibration damping and easy installation: the best of two models in a single design.   This new flexible coupling from VETUS combines the best features of the well-known UNIFLEX and BULLFLEX models at a lower price. The Combiflex coupling has been designed to ensure optimal damping of torsional vibrations generated by cycle irregularities, especially at low revolutions. The flexible... read+

Single-phase alternating current electropump (50 Hz), widely used on board to supply fresh or salt water.Required for the operation of air conditioning systems.Consists of a pump body and impeller in bronze, and a shaft in stainless steel AISI 316.• Voltage: 230 V• Power: 150 W• Current: 1.2 A• RPM: 2800• Maximum flow rate: 40 l/min• Maximum head: 5 m• Outlets... read+

Bulb for Maxi 20 headlight. • Equipped with LED with 360º total irradiation. • 12 V • 2 Units   Reference Length LED Chip Consumption Light Color Temp. 14.301.25 42 mm 12 36 2.5 W 250 lm 3000 K read+

Bulb for classic headlight 12 / Utility 85 / Utility 77. • Equipped with LED with 360º total irradiation. • 12 V • 2 Units   Reference Length LED Chip Consumption Light Color Temp. 14.301.23 39 mm 12 24 2.5 W 250 lm 3000 K read+