New Products

Ancor enables the correct termination of an NMEA2000 network. The yellow element connects to the corresponding 'T' on the network, creating a simplified, colour-coded installation. One male and one female terminator is required on each NMEA 2000 network. Colour coded to simplify installation and component identification. NMEA2000 approved, 100% universal and compatible with other manufacturers'... read+

Ancor enables the correct termination of an NMEA2000 network. The yellow element connects to the corresponding 'T' on the network, creating a simplified, colour-coded installation. One male and one female terminator is required on each NMEA 2000 network. Colour coded to simplify installation and component identification. NMEA2000 approved, 100% universal and compatible with other manufacturers'... read+

Connects PC to the CZone network for configuration and system set up read+

The Signal Interface (SI) connects the CZone system to your external sensors, alarms and switching devices. The SI allows intelligent, automated operation of circuits depending on the state of the input. - Accepts inputs from traditional switch types being used to control outputs - Accepts inputs from switches to trigger alarm i.e. high water float switch - Accepts inputs from industr... read+

The Switch Control Interface (SCI) provides an interface between the CZone network and traditional mechanical switches that manufacturers and users are familiar with. The SCI simplifies your wiring, supports your existing choice of switches, protects against failures and allows for expanding installation options. - Single switch position can control multiple OI channels - Attaches to switch pan... read+

The Output Interface (OI) provides an intelligent replacement for traditional circuit breakers and fuse panels. It has 6x high power, robust output channels which provide the power supply, control and fusing for a circuit as well as integrating many other built-in features such as timers and dimmers. Connection to the unit is simple: a large 6 way plug allows connections to cables of up to 16 m... read+

Tsunami Mk2 is the only manual bilge pump that eliminates air-locks • Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Tsunami Mk2 is the easiest manual bilge pump to install and service • Backwards compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps. • External mounting feet and integrated outlet reduce time and effort. • Service pump cartri... read+

Tsunami Mk2 is the only manual bilge pump that eliminates air-locks • Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Tsunami Mk2 is the easiest manual bilge pump to install and service • Backwards compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps. • External mounting feet and integrated outlet reduce time and effort. • Service pump cartri... read+

● Useful for draining waste water deposit tanks ● Inlet size 38 mm ● Exit 25 mm   Model V Flow L/min Flow L/min with 3-m head A Dimensions 50.221.12 12 v 47 33 18/9 260 x 140 x 90 mm read+

● Fuel filter compatible with the next Honda engines: BF80A BF100A BF90D/D4/DK0 BF75DK2/DK3/DK0 BF150AK2/A4 BF135AK2/A4 BF225AK2 BF225AK2/AK3/AK1/A6 BF200AK2/AK3/AK1/A6 BF175AK2/AK3/AK1/A6 BF250A BF115D/DK1/A2 BF130A2 ● Equivalent to the next references: Honda: 16911-ZY3-000, 16911-ZY3-010 Tohatsu: HZY3-16911-010 read+