New Products

Heavy-duty aluminum oars with UV-resistant polypropylene blades. Two-section design for easy storage without compromising strength. Complete with rowlock sleeve. Sold in pairs. read+

Dual mounting option: on wall or with bracket. Possibility to mount the ventilation hose both on the inlet and on the outlet. Anti-corrosion ABS housing. Complies with CEI EN50014-1 and N61000-3-3 standards for electric motors operating in potentially explosive environments. • Voltage: 12V • Flow rate: 220 m³/h • Current draw: 2.5 A • Outlet: Ø 76 mm • Dimensions: 160 x 160 x 196 mm • Optional... read+

Optimal vibration damping and easy installation: the best of two models in a single design.   This new flexible coupling from VETUS combines the best features of the well-known UNIFLEX and BULLFLEX models at a lower price. The Combiflex coupling has been designed to ensure optimal damping of torsional vibrations generated by cycle irregularities, especially at low revolutions. The flexible... read+

Self-priming with neoprene impeller and thermal protection against overload, with automatic reset. Permanent magnet motor. • Version A: brass body with stainless steel base. • Version B: thermoset resin body with stainless steel bases.   Item Version Voltage Maximum flow rate Head Consumption Self-priming Hose connection Replacement impeller 16.197.12 A 12 V 26 l/min 7.5 m 9.9 A ... read+

Bulb for classic headlight 12 / Utility 85 / Utility 77.• Equipped with LED with 360º total irradiation.• 12 V• 2 Units   Reference Length LED Chip Consumption Light Color Temp. 14.301.23 39 mm 12 24 2.5 W 250 lm 3000 K read+

Protective cover for the Simrad AP44 display. read+

Bulb for general-purpose headlights with lamp holder, 36 mm pin spacing.• Equipped with LED with 360º total irradiation.• 12 V• 2 Units   Reference Length LED Chip Consumption Light Color Temp. 14.300.33 36 mm 8 24 2 W 180 lm 3000 K read+

Bulb for general use and lanterns with lamp holders.• Equipped with LED with 360º total irradiation.• High-power version (2W). • 12 V• 2 Units   Reference Length LED Chip Power Light Color Temp. 14.301.21 31 mm 8 12 2 W 180 lm 3000 K read+

• Operates on a wide voltage range from 5V to 24V DC.• Used in combination with switches 14.523/14.524.xx or similar to adjust the brightness of ceiling lights/spotlights, either incandescent or LED (if compatible).• Maximum load 192W (at 24V) read+

Spacer that allows mounting Berker 14.520/521/522/523/524 modules without recessing them.  Reference Color 14.538.03 Black 14.538.04 White read+

Rear protection cover for Berker frames.• White color.  Reference Depth Suitable for modules 14.538.01 22 mm 14.520/521/522/523/524 14.538.02 45 mm 14.525/526/527.01 read+

Accessory for wireless engine cutoff switch. Ref. 14.968.02   read+

FLAT anti-vandal switch with AISI 316 stainless steel body manufactured by CNC. • Compatible with 12V and 24V systems and rated at 20A. • Protection rating IP67. • LED light ring available in 3 different colours. • Can be installed on surfaces with a maximum thickness of 8 mm. *Sold individually   Reference Colour 14.315.05 White 14.315.06 Red 14.315.07 Blue read+

FLAT anti-vandal switch with AISI 316 stainless steel body manufactured by CNC. • Compatible with 12V and 24V systems and rated at 20A. • Protection rating IP67. • LED light ring available in 3 different colours. • Can be installed on surfaces with a maximum thickness of 8 mm. *Sold individually   Reference Colour 14.315.01 White 14.315.02 Red 14.315.03 Blue read+

The TEMO 1000OUTPOD is a smart electric propulsion system built for small and mid size sailboats up to 9 meters. It combines the precise handling of a 48 V pod drive with the simplicity of an outboard style installation, giving you clean, quiet maneuvering without a bulky inboard setup. Because the unit is fully external and quickly detachable, you can remove it in seconds for storage, transpor... read+

The TEMO 2.3 kWh rack battery with AutoConnect rack is designed to deliver a true Plug and Play experience for TEMO PRO systems. Just slide the battery into the dedicated rack and the system connects automatically, resets, and is ready to run, with no complicated handling. With a compact format and a 12 kg battery weight, it’s easy to remove in moments and recharge at home, so you don’t need to... read+

The TEMO·1000 Mounting Bracket is the essential accessory (included with the TEMO·1000 motor) for securely attaching your motor to the boat transom. It clamps on quickly using two clamping levers, giving you a firm, stable mount without a complicated setup. A built in 360° rotating roller makes it easier to position and install the motor from inside or outside the boat. You can also fine tune p... read+