New Products

● Outside Diameter: 50mm ● Hole Diameter: 5mm ● High 84 mm ● Colours: white, gray or black read+

● Outside Diameter: 150mm ● Inside Diameter: 130mm ● High 110 mm ● Colours: white, gray or black read+

● Outside Diameter: 105mm ● Inside Diameter: 85mm ● High 63 mm ● Colours: white, gray or black read+

● Outside Diameter: 105mm ● Inside Diameter: 85mm ● Hole 5 mm ● Colours: white, gray or black read+

● Plastic Connector Kit for black water tanks. It Contains: - 2 of 90º  Racors Ø 38 mm - Blanking plug 1 1/4 "male - Straight hose connector 3/8 "Ø 17 mm. -Etc.. read+

● Active carbon filter for black waters tank’s vent complete with bracket and rubber hose terminal Ø 20/25 mm. Length 200 mm. read+

● Fuel decanter with nylon mesh and transparent bowl. Pressure casted light alloy body. Flow capacity 50 lt/ hour. For engines up to 2500 cc. * Does not include fittings   ● Only valid for fittings: FI2583 read+

● Kit of 2 swivelling fittings complete with fuel line terminal of 8 mm only for our art. FI2582. read+

- Convert Shurhold handles to fit other standard threaded attachments. read+

- The Dock-A-Reni is a dock line holding tool that attaches to any boat pole and allows you to tie your boat up with ease.  Just simply clip one end of the rope into the Dock-A-Reni and the rest of the loop over the end of your boat hook and you are ready to go. read+

- Adapter for 265 Shur-Dry flexible water blade adapter read+

- Snaps and zippers on awnings, straps, and other items suffer the corroding effects of rain, dirt, and grime. The result is often a mechanism that either sticks or rips the surrounding canvas or plastic. read+

- 10" Curved Adapter adds a 30-degree angle to any of our SHUR-LOK equipped accessories. Two holes at the end provide for 180-degree rotation read+

- PVA towel 17" x 27". read+

- Molds to curved surfaces, drying any surface in 1/3 the time. Made of rubber so it's safe to use on every surface, it eliminates water-spotting without chamois or towels read+

The Battery Protect off non-essential loads before the battery is fully discharged (which would damage the battery) or before it runs out of enough charge to start the engine 12 / 24V self-regulated The BatteryProtect automatically detects the system voltage easy programming The BatteryProtect can be set to connect / disconnect to several different voltages. The seven-segment display will ind... read+

● size: 52 mm ● scale: 90º ● dual LED Backlighting: White and Amber ● Stainless steel AISI 304 with convex lenses ● 100% waterproof, arustproof, UV protection and antifog ● Easy installation by pin-style wiring read+

● size: 52 mm ● scale: 90º ● dual LED Backlighting: White and Amber ● Stainless steel AISI 304 with convex lenses ● 100% waterproof, arustproof, UV protection and antifog ● Easy installation by pin-style wiring read+

● dual LED Backlighting: White and Amber ● Stainless steel AISI 304 with convex lenses ● 100% waterproof, arustproof, UV protection and antifog ● Easy installation by pin-style wiring read+

- Size: 85 mm Ø - Scale: 270º - Stainless and waterproof read+

- Size: 52 mm Ø - Scale: 90º - 12V - Stainless steel + waterproof read+

- Size: 52 mm Ø - Scale: 90º - 12V - Stainless steel read+

 Mooring hook that allows to hold and release a buoy when you are distant, avoidin the fixing of any support on the boat hook.  It's very simple to use, you just only have to keep the boat hook with one hand and pull the rope with the other one in order to open the gate of the connector.  Made in stainless steel AISI 316  It guarantees heavy load up to 24 kN  550 gr read+

● High resistance simple pulley with textil fixation to 12 mm max cord ● Hard anodizing + PTFE, with plastic insert. ● Black D1 D2 D3 S 28 mm 8.2 mm 4 mm 10.2 mm 34 mm 8.2 mm 5 mm 13.6 mm read+