New Products

● It can be used with 6V and 12V systems. 91 cm cable with alligator clips     read+

This device includes a Dual Circuit Plus™ Battery Switch and an Automatic Charging Relay. These components simplify switching and automate charging, so that all you have to do is turn the battery switch ON when you arrive and OFF when you leave. Dual Circuit Plus™ Battery Switch: • Simplifies switching • Isolates engine and house circuits • Combines batteries for emergency start... read+

● 600Amp continuous current for large diesel engines. terminal design a unique piece of tinned copper unsettles not with the passage of time. Ignition system protected against fire. The AFD models allow change while the engine is running without damaging the alternator. ● Amperage:           - 600A continuous           - 700A intermittent  ... read+

● Change battery two banks simultaneously with an ON / OFF switch bank holding isolated minimizing the risk of a depleted battery boot. ● The batteries combined function offers the possibility of combining the two banks of batteries in case a starter battery is low. ● Amperage:           - 350A continuous           - 525A intermittent   &nb... read+

This device is as simple to operate as an ON-OFF switch, yet effectively manages the switching and charging of two batteries from a single charge source. It includes a Dual Circuit Plus™ Battery Switch and an Automatic Charging Relay. These components simplify switching and automate charging, so that all you have to do is turn the battery switch ON when you arrive and OFF when you leave. ... read+

● The M series battery switch (mini) changes from one bank to another bank or two banks only one with a single switch. ● Amperage:           - 300A continuous           - 500A intermittent           - 1500A starter ● 73 x 73 mm ● Type: 1.2, both, off   * The picture is only a reference and may not correspond 10... read+

● This innovative switch combines 3 functions in battery switch 1 in order to control intuitively 2 banks of batteries and 2 loads. A unique security position aisa a load (eg services) ON, Start (motor) OFF, should a problem occur with the engine, so that a radio distress call could be made. It offers significant savings in both space and cost without compromising functionality or security. ● T... read+

● A powerful new generation of battery switches with excellent rendimineto and advantages for the installer and the end user. It offers three different mounting options: surface, rear panel and front panel. Besides optimized access to cables it makes installation easy. Pro Installer momentary switch are characterized by their ergonomic and intuitive design and fabrication with the best material... read+

● For use with two or more batteries in systems less than 50 V ● Choose between different battery before starting the charge cycle or operate with both batteries in parallel. ● Ignition protected from fire. ● 4 position without locking ● Amperage:         - 160A continuous         - 210A intermittent ● Dimensions: 133 x 67 mm read+

● Designed for use in fresh or salt water. waterproof construction. ● Suitable for Wet Cell and AGM batteries. ● Independent outputs. Fully automatic and multi-phase load. Battery maintenance mode. Diagnostic codes. temperature compensated and controlled by microprocessor. LED lights for charge status. Protected against reverse polarity. ● Charging Cables 1.52 mm 0.91 mm DC and AC. ● 12 -24 V ●... read+

● Manages automatically load two battery banks and isolates the batteries during power protecting sensitive elements. ● The LED light indicates the ARC states. ● With surface mount options, front or rear panel has a lid that isolates the connections to the terminal and prevent short-circuiting. ● 12 -24 V read+

   Contact Double   Length: 25.4 mm   150 mm cable     read+