Specials

4.5 m interface cable designed to connect Evinrude engines to NMEA 2000 networks, enabling engine data visualization on Simrad plotters. Includes a T-connector for straightforward installation. Ideal for integrating engine telemetry into navigation systems. Technical details 4.5 m interface cable for Evinrude engines Compatible with NMEA 2000 data networks Enables engine data visualization on ... read+

The Simrad WS80 Wind Sensor is designed to provide accurate and reliable wind data in demanding marine environments. This device transmits wind data in NMEA 0183 format, a standard widely used in the marine industry for communication between instruments. Integration and compatibility The connection is made via an RS485 (or RS422) data interface, ensuring robust and interference-free signal tran... read+

The Simrad FU80 steering remote offers intuitive controls and a 1.7-inch integrated display that can be used to make course, heading, rudder angle, or autopilot mode changes from anywhere on board. Adding this remote to your system provides dedicated steering controls for your fully integrated autopilot system, complementing the touchscreen controls on your multifunction display. Intuitive cont... read+

The Simrad QS80 dedicated steering remote offers intuitive controls and a 1.7-inch display for adjusting course, heading, rudder angle, or autopilot mode from anywhere on board. This remote complements the touchscreen controls on your multifunction display, providing dedicated steering for your fully integrated autopilot system. Intuitive control It enables autopilot control from multiple stati... read+

The Simrad NF80 steering remote offers intuitive controls and a 1.7-inch display that can be used to adjust route, heading, rudder angle, or autopilot mode from anywhere on board. This device provides dedicated steering controls for your fully integrated autopilot system, complementing the touchscreen controls on your chartplotter. Intuitive control Adding a remote enables autopilot control fro... read+

The Simrad AC70 is an autopilot computer for rudder control with Simrad AP70 and AP80 systems. With an output of 30/50 A, the motor current has sufficient power output to control drive units on boats over 40ft in length, depending upon rudder size and displacement. Integration and compatibility NMEA0183® Connectivity allows you to connect to an AP70 controller or NSS, NSE or NSO navigation ... read+

The Simrad AD80 analog drive interface is designed for rudder or thruster control with Simrad AP70 and AP80 autopilot systems. This drive interface enables analog or proportional control of the rudder or thrusters using analog voltage or low-level current. Key benefits The device offers the possibility of frequency, voltage, or current angle feedback for enhanced precision. It also features a d... read+

The Simrad SD80 Solenoid Drive Interface is designed for rudder or thruster control, offering a robust solution for Simrad AP70 and AP80 autopilot systems. This device manages additional drive units or thrusters, ensuring seamless integration with navigation electronics. Intuitive control The system supports both on/off and proportional control, adapting to the specific needs of each vessel. Fu... read+

The Simrad SI80 signal interface unit is a 12/24 V DC signal interface module specifically designed for Simrad AP70 and AP80 autopilot systems. This device provides four IEC 61162-1 (NMEA 0183) input and output channels, enabling robust data integration. Integration and compatibility In addition to signal connections, the SI80 includes a Sim Net power supply to power connected components. Power... read+

Simrad SD80 Printed Circuit Board (PCB) assembly. This electronic component serves as the control interface for the vessel's steering and thruster systems. Designed to accurately manage control signals, it ensures proportional and reliable response for the rudder and thrust systems, guaranteeing the integrity and performance of the navigation system. Technical details Simrad SD80 Printed Circu... read+

This standoff frame enables the FU80, NF80, or QS80 autopilot remote to be mounted external to a bulkhead or other surface, offering a simple and cost-effective installation option. This external mounting solution is ideal where flush mounting is impractical or impossible. Integration and compatibility The kit is specifically designed to be compatible with the FU80, NF80, and QS80 models. Key b... read+

The Simrad RF70N rudder position sensor is a medium-duty device designed for accurate steering angle measurement. Based on the RF45X mechanics, it features a CAN-bus interface for direct integration with navigation and rudder control systems. Its robust construction ensures reliability in demanding marine environments. Technical details Simrad RF70N medium-duty rudder position sensor with CAN-... read+

AC70 Printed Circuit Board (PCB) assembly, an essential electronic component for Voith Schneider propeller control systems. This module ensures proper signal management from the control unit, guaranteeing reliability and precision in steering maneuvers. Designed for direct integration into B&G navigation electronics, this technical spare part is crucial for maintaining optimal propulsion sy... read+

The Simrad SIMKIT-3 conversion kit enables the integration of Micro-C devices into the Simnet data network. This complete package facilitates the connection of sensors and accessories, ensuring reliable data communication. Key benefits It includes all necessary installation components: 2m Simnet cable (ref. 24005837), termination plug (ref. 24005894), 2m power cable with terminator (ref. 240059... read+

The drive is a rotary mechanical autopilot drive system which makes it simple and economical to fit an autopilot on smaller powerboats with mechanical push-pull cable steering. The drive unit is suitable for standard straight shaft configurations and incorporate a drive motor, solenoid clutch and integrated rudder feedback (RFB) capability. Key benefits The compact drive unit completely replace... read+

The Simrad MO16-T is a 15.6-inch widescreen monitor featuring sunlight viewable capabilities and touch screen functionality, suitable for vessels larger than 35 feet. This device provides intuitive control over your entire Simrad glass bridge system via a bright and clear 15.6-inch display. Intuitive control With familiar gestures like pinch-to-zoom, operating your bridge displays becomes as si... read+

The Simrad MO19-T enables intuitive multi-touch control of your glass bridge system through a bright and clear 18.5-inch widescreen display. With familiar gestures like pinch-to-zoom, operating your bridge displays becomes as simple as using a tablet or smartphone. All-weather visibility MO-series marine monitors can also be installed as an extra screen for other HDMI-capable Simrad displays, a... read+

The Simrad MO24-T is a 24-inch multi-touch widescreen monitor with high brightness and sunlight readability, suitable for vessels larger than 35 feet. It enables intuitive control of your glass bridge system through familiar gestures like pinch-to-zoom, making operation as simple as using a tablet or smartphone. All-weather visibility The MO-series monitors can be installed as an additional scr... read+

Bezel frame kit for the Simrad MO24 series. The package includes 2 pieces in silver and black finishes, designed for installation on the navigation console. Original Simrad (Navico) product with reference 000-11622-001. Ensures a precise fit for the chartplotter screen. Technical details Bezel frame kit for the Simrad MO24 series Includes 2 pieces in silver and black finishes Designed for inst... read+

The PUMP-1 hydraulic pump is a 0.8L reversible unit designed for outboard pilot systems. This pump is compatible with Sea Star manual helm pumps, accommodating a displacement of up to 14 cubic inches. Key benefits The package includes three ORB-5 to 9/16 UNF fittings. These fittings facilitate integration into various steering configurations. This component is essential for ensuring the effecti... read+

Connect and share AIS data with your Simrad navigation systems via its NMEA 2000 bus and three bidirectional NMEA 0183 ports. Enables integration of external sensors such as heading and gyro, ensuring data visualization on Simrad, ECS/ECDIS, and E5000 series units. Technical details Includes three bidirectional NMEA 0183 ports for data transmission Compatible with NMEA 2000 bus for simple netw... read+

The Simrad AIS Pilot Plug is specifically designed to connect Personal Pilot Units (PPU) to V5043 AIS transceiver systems. This component is essential for integrating the automatic identification system into the user's navigation setup. Intuitive control By using this accessory, a reliable and direct communication is guaranteed between the autopilot controls and the AIS data transmission unit. ... read+