Set consisting of 6 MVSV 2V 1000Ah gel cells, supplied in 1 transport crate. Connecting them in series allows a 12V battery bank to be configured for high-capacity stationary systems.
This set comprises 6 gel cells from the MVSV range, each with a nominal voltage of 2V and a commercial capacity of 1000Ah. It is intended for stationary installations requiring high storage capacity, continuous operation and a construction suited to demanding applications.
Connecting the 6 cells in series allows a 12V battery bank with a nominal capacity of 998Ah to be configured. In a series connection, the cell voltages are added together and their capacity is maintained. To promote balanced operation, the connected units must be of the same range, model, capacity and state of charge. New cells must not be combined with used units.
Valve-regulated lead-acid technology keeps the electrolyte immobilised in gel and requires no water topping up. The cells can be installed in a vertical or horizontal position, always with the same orientation within the bank. In horizontal installations, each unit must be individually supported on a suitable rack along its entire surface.
The 6 cells are supplied in 1 transport crate.
Main features
- Set of 6 gel cells from the MVSV range.
- 12V configuration by connecting the 6 cells in series.
- Valve-regulated lead-acid technology.
- Electrolyte immobilised in gel.
- No water topping up required.
- Designed for high-capacity stationary systems.
- Installation permitted in a vertical or horizontal position.
- Approximate self-discharge of 2% per month at 20°C.
- Supplied in 1 transport crate.
Technical specifications
- Range: MVSV.
- Technology: valve-regulated lead-acid with gel electrolyte.
- Number of cells: 6.
- Nominal voltage per cell: 2V.
- Commercial capacity per cell: 1000Ah.
- Nominal technical capacity per cell: 998Ah at C10, down to 1.8V per cell at 20°C.
- C10 discharge current per cell: 99.8A.
- Series configuration of the 6 cells: 12V and 998Ah nominal.
- Number of terminal pairs per cell: 2.
- Internal resistance per cell: 0.38mΩ.
- Short-circuit current per cell: 4850A.
- Float voltage: 2.30V per cell at 25°C.
- Float voltage for the 12V configuration: 13.8V.
- Absorption voltage: 2.38V per cell at 25°C, for a maximum of 5 hours.
- Absorption voltage for the 12V configuration: 14.25V.
- Charge temperature compensation: −5mV/°C per cell.
- Charge compensation for the 12V configuration: −30mV/°C.
- Recommended charge current: between 10A and 50A per 100Ah of nominal capacity.
- Operating temperature: from −20°C to 45°C.
- Nominal operating temperature: from 10°C to 30°C.
- Recommended operating temperature: 20°C.
- Absolute maximum temperature: 55°C.
- Storage temperature: from −40°C to 55°C.
- Maximum dimensions per cell: 212 × 193 × 690mm.
- Case height without terminals: 648mm.
- Installed length per cell: 221mm.
- Approximate weight per cell: 66kg.
- Approximate total weight of the 6 cells: 396kg.
- Terminals: F-M8.
- Tightening torque for M8 connections: 20 ± 1Nm.
- Case material: styrene-acrylonitrile copolymer.
- Case flammability rating: UL 94 HB.
- Recommended minimum spacing between cells: 10mm.
- Recommended maximum temperature difference between cells: 3°C.
- Installation position: vertical or horizontal.
- Approximate self-discharge: 2% per month at 20°C.
Be the first to leave your opinion
0/5Write your opinion about this product
Autumn offers
