New Products

The MD range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increased electrical loads found on today's boats. This reduces cable lengths and sizes, providing significant savings in expense and weight of copper battery cable. They are ideal for remote isolation of bow and stern thrusters. - Remote operation - Battery switch can... read+

NMEA 2000 Approved Power Cable with Tee allows for power connection to an NMEA 2000 network quickly and easily. The tee is color coded red to make identifying the power cable easy once installed as part of an NMEA 2000 network. The yellow couplers connect to the corresponding backbone cables and tees, creating a simplified, color coded network installation. - Color-coded for easy installation a... read+

Ancor enables the correct termination of an NMEA2000 network. The yellow element connects to the corresponding 'T' on the network, creating a simplified, colour-coded installation. One male and one female terminator is required on each NMEA 2000 network. Colour coded to simplify installation and component identification. NMEA2000 approved, 100% universal and compatible with other manufacturers'... read+

Ancor enables the correct termination of an NMEA2000 network. The yellow element connects to the corresponding 'T' on the network, creating a simplified, colour-coded installation. One male and one female terminator is required on each NMEA 2000 network. Colour coded to simplify installation and component identification. NMEA2000 approved, 100% universal and compatible with other manufacturers'... read+

Connects PC to the CZone network for configuration and system set up read+

The Signal Interface (SI) connects the CZone system to your external sensors, alarms and switching devices. The SI allows intelligent, automated operation of circuits depending on the state of the input. - Accepts inputs from traditional switch types being used to control outputs - Accepts inputs from switches to trigger alarm i.e. high water float switch - Accepts inputs from industr... read+

The Output Interface (OI) provides an intelligent replacement for traditional circuit breakers and fuse panels. It has 6x high power, robust output channels which provide the power supply, control and fusing for a circuit as well as integrating many other built-in features such as timers and dimmers. Connection to the unit is simple: a large 6 way plug allows connections to cables of up to 16 m... read+

Tsunami Mk2 is the only manual bilge pump that eliminates air-locks • Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Tsunami Mk2 is the easiest manual bilge pump to install and service • Backwards compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps. • External mounting feet and integrated outlet reduce time and effort. • Service pump cartri... read+

Tsunami Mk2 is the only manual bilge pump that eliminates air-locks • Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Tsunami Mk2 is the easiest manual bilge pump to install and service • Backwards compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps. • External mounting feet and integrated outlet reduce time and effort. • Service pump cartri... read+

● Useful for draining waste water deposit tanks ● Inlet size 38 mm ● Exit 25 mm   Model V Flow L/min Flow L/min with 3-m head A Dimensions 50.221.12 12 v 47 33 18/9 260 x 140 x 90 mm read+