New Products

The Simrad SI80 signal interface unit is a 12/24 V DC signal interface module specifically designed for Simrad AP70 and AP80 autopilot systems. This device provides four IEC 61162-1 (NMEA 0183) input and output channels, enabling robust data integration. Integration and compatibility In addition to signal connections, the SI80 includes a Sim Net power supply to power connected components. Power... read+

The Simrad SD80 Solenoid Drive Interface is designed for rudder or thruster control, offering a robust solution for Simrad AP70 and AP80 autopilot systems. This device manages additional drive units or thrusters, ensuring seamless integration with navigation electronics. Intuitive control The system supports both on/off and proportional control, adapting to the specific needs of each vessel. Fu... read+

The Simrad AD80 analog drive interface is designed for rudder or thruster control with Simrad AP70 and AP80 autopilot systems. This drive interface enables analog or proportional control of the rudder or thrusters using analog voltage or low-level current. Key benefits The device offers the possibility of frequency, voltage, or current angle feedback for enhanced precision. It also features a d... read+

The Simrad AC70 is an autopilot computer for rudder control with Simrad AP70 and AP80 systems. With an output of 30/50 A, the motor current has sufficient power output to control drive units on boats over 40ft in length, depending upon rudder size and displacement. Integration and compatibility NMEA0183® Connectivity allows you to connect to an AP70 controller or NSS, NSE or NSO navigation ... read+

The Simrad NF80 steering remote offers intuitive controls and a 1.7-inch display that can be used to adjust route, heading, rudder angle, or autopilot mode from anywhere on board. This device provides dedicated steering controls for your fully integrated autopilot system, complementing the touchscreen controls on your chartplotter. Intuitive control Adding a remote enables autopilot control fro... read+

The Simrad QS80 dedicated steering remote offers intuitive controls and a 1.7-inch display for adjusting course, heading, rudder angle, or autopilot mode from anywhere on board. This remote complements the touchscreen controls on your multifunction display, providing dedicated steering for your fully integrated autopilot system. Intuitive control It enables autopilot control from multiple stati... read+

The Simrad FU80 steering remote offers intuitive controls and a 1.7-inch integrated display that can be used to make course, heading, rudder angle, or autopilot mode changes from anywhere on board. Adding this remote to your system provides dedicated steering controls for your fully integrated autopilot system, complementing the touchscreen controls on your multifunction display. Intuitive cont... read+

The Simrad WS80 Wind Sensor is designed to provide accurate and reliable wind data in demanding marine environments. This device transmits wind data in NMEA 0183 format, a standard widely used in the marine industry for communication between instruments. Integration and compatibility The connection is made via an RS485 (or RS422) data interface, ensuring robust and interference-free signal tran... read+

4.5 m interface cable designed to connect Evinrude engines to NMEA 2000 networks, enabling engine data visualization on Simrad plotters. Includes a T-connector for straightforward installation. Ideal for integrating engine telemetry into navigation systems. Technical details 4.5 m interface cable for Evinrude engines Compatible with NMEA 2000 data networks Enables engine data visualization on ... read+

The Simrad Yamaha Engine Interface Cable allows direct connection to Yamaha outboard engines without the need for the Yamaha Command Link Plus system. This accessory is compatible with a wide range of F, T, LF, and Z series models, covering power outputs from 50 to 300 HP, specifically those manufactured in 2006 or later. Integration and compatibility Installation requires an NMEA 2000 network,... read+

Water speed sensor (plotter) spare part for B&G H5000 and H3000 systems. This component replaces the original sensor to maintain the integrity of the NMEA 2000 network. Ensures accurate boat speed readings in demanding marine conditions. Compatible with H2000 and other selected systems. Technical details Water speed sensor for B&G H5000 and H3000 systems Compatible with H2000 and other... read+

Whether cruising, fishing or sailing, C-MAP® REVEAL™ charts offer the very best of C-MAP. With Shaded Relief, including game-changing Reveal Seafloor Imagery, Aerial Photography, Satellite Overlay and Dynamic Raster Chart presentation added to the core C-MAP features found in DISCOVER™ – full-featured Vector Charts, with Custom Depth Shading, Tides & Currents and subsc... read+

Experience the new generation of C-MAP charts featuring the innovative 3D shaded relief that brings the surroundings to life. REVEAL X charts offer a fresh, dynamic experience, incorporating the new Map Inspector Tool for quick access to essential data. Key benefits Smooth integration with the Simrad Companion App allows you to plan trips and sync routes directly to your plotter. High-resolutio... read+

Experience the X generation of C-MAP charts with the DISCOVER X version, designed exclusively for the Simrad NSX system. This update provides a clearer and more dynamic navigation experience thanks to the latest vector data and optimized chart presentation for every zoom level. Sailing features for cruising and racing The system features high-quality day and night modes for safe navigation in a... read+

Simrad EGON C-EGON-03 CAN interface cable, designed to connect Simrad and B&G devices to the NMEA 2000 network. Facilitates data integration and communication between the chartplotter and other navigation instruments. Includes ID CAN 3 connector for simple and secure installation. Official Simrad product. read+

CAN interface cable for Simrad/Navico devices. The package includes the interface cable and connection kit 000-0119-79 (N2K-T-RD, MICRO-C, T-JOINER). Designed for secure and stable integration in marine environments, facilitating data communication between the chartplotter and network sensors. Technical details NMEA 2000 interface cable Micro-C to T-Joint connector Compatible with Simrad/Navic... read+

NMEA 2000 interconnection cable for Simrad devices. The pack includes the CAN ID cable 1 (ref. C-EGON-01) along with a T-connector and micro-connector for secure and reliable installation in navigation systems. Technical details NMEA 2000 interconnection cable for Simrad devices Includes CAN ID cable 1 (ref. C-EGON-01) for data communication Compatible with certified navigation systems and Sim... read+

50-meter connection cable specifically designed for the 213 Masthead Unit. This official B&G accessory enables the complete integration of the navigation system on board, ensuring the necessary physical connection for the equipment to function. Technical details 50-meter connection cable specifically designed for the 213 Masthead Unit Includes B&G 213 Masthead Cable, 50m read+

36-meter connection cable specifically designed for the 213 Masthead Unit. This official B&G accessory enables connection and communication with the corresponding navigation head unit, ensuring compatibility and correct operation of the instrument system on the mast. Technical details 36-meter connection cable specifically designed for the 213 Masthead Unit Includes 1x B&G 213 Mast C... read+

24-meter connection cable specifically designed for the B&G 213 masthead unit, ensuring reliable data and power transmission in demanding marine environments. Its optimized length facilitates installation on larger vessels, ensuring a stable connection for navigation and vessel control systems. Technical details 24-meter connection cable specifically designed for the B&G 213 masthead u... read+

Official Simrad gimbal bracket designed exclusively for 10-inch displays of the NSS 4 and Zeus SR series. Allows smooth tilting and rotation for optimal visibility in any position. Its robust construction ensures a secure and stable fit, facilitating vertical or horizontal adjustment according to navigation needs. Ideal for improving ergonomics and usability of the equipment on the console. Tec... read+

Gimbal mount specifically designed for 12-inch Simrad NSS 4 and Zeus SR displays, allowing smooth tilt and orientation adjustment for optimal visibility in any cabin position. Built with corrosion-resistant materials, this mount ensures a secure and stable installation, optimizing user ergonomics while navigating. Technical details Gimbal mount specifically designed for 12-inch Simrad NSS 4 an... read+

Gimbal mount designed specifically for 16-inch displays from the NSS-4 and Zeus SR series, allowing smooth tilt and rotation for optimal visibility at any angle. Its robust construction ensures a secure and stable installation, ideal for demanding marine environments. Compatible with the full range of Simrad plotters, ensuring seamless integration with the vessel's navigation and control system... read+

Sun cover specifically designed for the B&G Zeus SR 10-inch chartplotter. This custom-fit cover protects the touchscreen from scratches, dust, splashes, and adverse weather conditions during storage or transport. Its ergonomic design ensures comprehensive protection without compromising device integrity, maintaining screen clarity and the functionality of your B&G navigation equipment. ... read+