New Products

The RAM-D-115-C-KNOB9H is a marine electronic plate with a D size ball for supporting larger devices. This plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fish finder gimbal brackets. The kit includes a base with a 2.25” diameter D size ball, a short arm, and a Hi-Torq wrench. The Hi-Torq wrench helps to tighten the knob on the arm for a secure hold in ... read+

The RAM-D-111-KNOB9HU consists of a 3.68" diameter round base, Standard length double socket arm and 11" x 3" rectangular plate. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB R... read+

The RAM Large Marine Electronics Mount (RAM-D-111U-E) is a complete, drill-down mounting solution for fish finders, chartplotters, and other large electronic devices. This kit consists of D size components, including a 3.68" diameter round base, long-length double socket arm, and 11" x 3" rectangular adapter plate. The round base is pre-drilled with several combinations of holes, including two ... read+

This powder-coated, marine-grade aluminum Humminbird mount consists of a short length double socket arm, a 3.68" diameter round base with a 2.25" D size ball, a RAM Hi-Torq Wrench, and one 1.5" x 4.5" rectangular plate with a 2.25" D size ball. The round plate contains two mounting holes at 180-degrees and three mounting holes at 120-degrees. The 1.5" x 4.5" rectangular plate contains a 4-hole ... read+

The RAM Large Marine Electronics Mount (RAM-D-111U) is a complete, drill-down mounting solution for fish finders, chartplotters, and other large electronic devices. This kit consists of D size components, including a 3.68" diameter round base, medium-length double socket arm, and 11" x 3" rectangular adapter plate. The round base is pre-drilled with several combinations of holes, including two ... read+

The RAM Large Marine Electronics Mount with RAM Hi-Torq Wrench (RAM-D-111-C-KNOB9H) is a complete, drill-down mounting solution for fish finders, chartplotters, and other large electronic devices. This kit consists of D size components, including a 3.68" diameter round base, short-length double socket arm, and 11" x 3" rectangular adapter plate. The base is pre-drilled with two holes at 180° an... read+

The RAM-D-115-E is a mounting solution consisting of a base with a 2.25” diameter D size ball, a long arm, and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fish finder gimbal brackets.   Compatibility • Device Support: Supports devices s... read+

The RAM-D-111U-C-MI1 consists of a 3.68" diameter round base, Short double socket arm with jam nut 2 way lock and 11" x 3" rectangular base.   Round Base Features • Pre-drilled holes: two holes at 180 degrees and three holes at 120 degrees.   Rectangular Base Features • Pre-drilled holes: different combinations of pre-drilled holes which will match up to many electronic devices and mo... read+

This powder-coated, marine-grade aluminum Humminbird mount consists of a short length double socket arm, a 3.68" diameter round base with a 2.25" D size ball, and one 1.5" x 4.5" rectangular plate with a 2.25" D size ball. The round plate contains two mounting holes at 180-degrees and three mounting holes at 120-degrees. The 1.5" x 4.5" rectangular plate contains a 4-hole pattern compatible wit... read+

The RAM-S-D-111U-C is a mounting solution featuring a 3.68" diameter round base, a short length double socket arm, an 11" x 3" rectangular base, and a RAM mixed combination Pin-Lock security nut and key knob.   Round Base Features • Pre-drilled holes for secure installation • Two holes at 180 degrees • Three holes at 120 degrees   Rectangular Base Features • Different combinations of ... read+

The RAM-S-D-111 consists of a 3.68" diameter round base, Standard Length double socket arm, 11" x 3" rectangular base, RAM mixed combination Pin-Lock security nut and key knob. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic... read+

The RAM-SG-B-111U consists of a 2.5" diameter round base, standard length double socket arm, 6.25" x 2" rectangle plate, RAM mixed combination Pin-Lock security nut/knob and key knobs for Gimbal Brackets. The 6.25" x 2" rectangle plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with ... read+

The RAM-S-111U consists of a 2.5" diameter round base, Standard Length double socket arm, 6.25" x 2" rectangle base, RAM mixed combination Pin-Lock security nut and key knob. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device. read+

The RAM-SG-111U consists of a 2.5" diameter round base, Standard Length double socket arm, 6.25" x 2" rectangle base, RAM mixed combination Pin-Lock security nut/knob and key knobs for Gimbal Brackets. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your... read+

The RAM-SG-D-111U consists of a 3.68" diameter round base, Standard Length double socket arm, 11" x 3" rectangular base, RAM mixed combination Pin-Lock security nut/knob and key knob for Gimbal Brackets. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will ... read+

The RAM-S-B-111U consists of a 2.5" diameter round base, short length double socket arm, 6.25" x 2" rectangle base, RAM mixed combination Pin-Lock security nut and key knob. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device. read+

The RAM-SG-D-111U-C consists of a 3.68" diameter round base, Short Length double socket arm, 11" x 3" rectangular base, RAM mixed combination Pin-Lock security nut/knob and key knob for Gimbal Brackets. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will m... read+

read+

The RAP-107U consists of a composite 2.5" diameter round base with the universal Amps hole pattern, composite double socket arm, and connecting Humminbird/Apelco marine adapter base.   Mounting System • Patented rubber ball and socket system with a 1.5" diameter. • Adjustment points at both ends of the double socket arm. • Allows for almost infinite adjustment and perfect viewing angles. read+

The RAP-202-153-202 features a round 2.5" diameter base with a Universal AMPs Hole Pattern, a double socket arm, and a 1.5" x 3" rectangular base.   Base Specifications • Round Base: 2.5" diameter with a Universal AMPs Hole Pattern. • Rectangular Base: 1.5" x 3" with four holes featuring a center-to-center pattern of 1" x 2.5".   Material Composition • Construction: The round base and... read+

The RAM Universal Composite Marine Electronic Mount (RAP-111U) is a rugged, fully adjustable mounting solution built for dependable performance on the water. Made from high-strength composite materials, this system includes a C size medium-length double socket arm, a 2" x 1.7" square drill-down base, and a 0.25" x 2" rectangular adapter plate for secure device attachment. The rectangular adapte... read+

The RAP-B-111-A consists of a 2" x 2.5" rectangle base, Short length double socket arm and 6.25" x 2" rectangle plate. The rectangle base contains pre-drilled holes, including the universal Amps hole pattern. The 6.25" x 2" rectangle plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, ... read+

Designed for light duty salt water use, this B size (1”) composite drill-down kit for the Lowrance Eagle 4 & 5 and Hook² allows users to swap out the factory mounting solution with a RAM Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you're ready to connect the double socket arm and round base featuring the Amps hole pattern. Made of high strength composite and po... read+