Holders

The RAM-B-101-L1 is a medium length B-size arm designed for mounting a Lowrance MB-7 Sonar unit.   Mounting and Compatibility • Round Plate: Features a 2.5" diameter round plate with a universal Amps hole pattern. • Gimbal Bracket Attachment: Includes a round plate that attaches to the gimbal bracket. read+

The RAM-B-101-G1U is a medium length B-size arm designed for mounting GPS devices.   Mounting and Compatibility • Universal Amps hole pattern for secure attachment. • Includes hardware for attaching a Garmin StreetPilot III or a Garmin Gpsmap 172-250. • Features two 2.5" diameter round plates. read+

The RAM Composite Universal Marine Electronic Mount (RAP-B-111U) is a kit intended for lightweight mounting for marine GPSes, CB radios, ham radios, gimbal brackets, and more. It comes with a 2" x 2.5" rectangle base, medium-length double socket arm, and 6.25" x 2" rectangle adapter plate. The adapter plate is pre-drilled with multiple hole combinations, including the universal Amps hole patter... read+

The RAP-B-107-1U consists of a composite 2.5" diameter round base with the universal AMPs hole pattern, composite double socket arm and connecting Humminbird/Eagle/Lowrance marine base. The mount is designed with the RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm. This allows for almost infinite adjustment and perfect view... read+

The RAP-B-101U-G4 consists of a 2.5" diameter round base with the universal Amps hole pattern, double socket arm and round adapter base that attaches directly to the bottom of the Garmin echo and Striker 4 Series. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. This with RAM's rubber ball and socket technolog... read+

The RAP-B-107-1B-354-TRA1U consists of a Track Ball base, composite double socket arm and connecting Humminbird/Eagle/Lowrance marine base. The mount is designed with the RAM 1" diameter rubber ball and socket system that has adjustment points at both ends of the double socket arm. This allows for high adjustability to achieve perfect viewing angles. This kit is compatible with virtually any tr... read+

The RAM-202-153-B-202U consists of a round 2.5" diameter round base (Universal AMPs Hole Pattern), short double socket arm and 1.5" x 3" rectangular base.   Base Specifications • Round Base: 2.5" diameter with Universal AMPs Hole Pattern. • Rectangular Base: 1.5" x 3" with four holes featuring a center to center pattern of 1" x 2.5". read+

The RAM single swing and socket arm mount includes a 6" straight swing arm mounted on a vertical surface mounting base. At the end of the mount is a rectangular 6.25" x 2" top base. The bolt pivoting point of the mount allows a 360 degree rotation. read+

The RAM-111U-DL consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, 9 inch double socket arm, locking knob and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine Gps, Cb Radios, Ham Radios, Gimbal Brackets and more. read+

This kit includes a vertical base, single swing arm and marine electronics mounting plate. The included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device. read+

The RAM-109HU consists of a 6" long bent swing arm mounted on a horizontal surface base. At the device mounting end is a rectangular 6.25" x 2" plate. There are two pivoting points on the mount: one at the base of the swing arm and one at the center of the rectangular plate. Each pivoting point allows a complete 360-degree rotation. read+

The RAP-B-107U consists of a composite 2.5" diameter round base with the universal AMPs hole pattern, composite double socket arm and connecting Humminbird/Apelco marine adapter base. The mount is designed with the RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; thus allowing for almost infinite adjustment and perfect view... read+

The RAM Universal Composite Marine Electronic Mount (RAP-111U) is a rugged, fully adjustable mounting solution built for dependable performance on the water. Made from high-strength composite materials, this system includes a C size medium-length double socket arm, a 2" x 1.7" square drill-down base, and a 0.25" x 2" rectangular adapter plate for secure device attachment. The rectangular adapte... read+

The RAP-202-153-202 features a round 2.5" diameter base with a Universal AMPs Hole Pattern, a double socket arm, and a 1.5" x 3" rectangular base.   Base Specifications • Round Base: 2.5" diameter with a Universal AMPs Hole Pattern. • Rectangular Base: 1.5" x 3" with four holes featuring a center-to-center pattern of 1" x 2.5".   Material Composition • Construction: The round base and... read+

The RAM-SG-D-111U consists of a 3.68" diameter round base, Standard Length double socket arm, 11" x 3" rectangular base, RAM mixed combination Pin-Lock security nut/knob and key knob for Gimbal Brackets. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will ... read+

The RAM-SG-111U consists of a 2.5" diameter round base, Standard Length double socket arm, 6.25" x 2" rectangle base, RAM mixed combination Pin-Lock security nut/knob and key knobs for Gimbal Brackets. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your... read+

The RAM single swing and socket arm mount includes a 6" straight swing arm mounted on a horizontal surface mounting base. At the end of the mount is a rectangular 6.25" x 2" top base. The bolt pivoting point of the mount allows a 360 degree rotation. read+

The RAM single swing arm mount consists of a 6" long swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation. read+

The RAM single swing and socket arm mount includes a 6" straight swing arm mounted on a horizontal surface mounting base. At the end of the mount is a rectangular 6.25" x 2" top base. The pivoting point of the rectangle base allows 180 degree rotation, the swing arm allows a 360 degree rotation. read+

The RAM-SG-B-111U consists of a 2.5" diameter round base, standard length double socket arm, 6.25" x 2" rectangle plate, RAM mixed combination Pin-Lock security nut/knob and key knobs for Gimbal Brackets. The 6.25" x 2" rectangle plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with ... read+

The RAM-S-D-111 consists of a 3.68" diameter round base, Standard Length double socket arm, 11" x 3" rectangular base, RAM mixed combination Pin-Lock security nut and key knob. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic... read+

The RAM-S-D-111U-C is a mounting solution featuring a 3.68" diameter round base, a short length double socket arm, an 11" x 3" rectangular base, and a RAM mixed combination Pin-Lock security nut and key knob.   Round Base Features • Pre-drilled holes for secure installation • Two holes at 180 degrees • Three holes at 120 degrees   Rectangular Base Features • Different combinations of ... read+

This powder-coated, marine-grade aluminum Humminbird mount consists of a short length double socket arm, a 3.68" diameter round base with a 2.25" D size ball, and one 1.5" x 4.5" rectangular plate with a 2.25" D size ball. The round plate contains two mounting holes at 180-degrees and three mounting holes at 120-degrees. The 1.5" x 4.5" rectangular plate contains a 4-hole pattern compatible wit... read+

The RAM double swing arm mount includes two 6" long bent swing arms mounted on a vertical surface mounting base. At the end of the device mount is a rectangular 6.25 x 2" top base. The pivoting points of the mount allow a complete 360 degree rotation. read+