Trudesign

● Available in different diameters:    - 19 to 19 mm (3/4" input to output)    - 25 to 25 mm (1" input to output)    - 32 to 32 mm (1" 1/4 input to output)    - 38 to 38 mm (1" 1/2 input to output)    - 50 to 50 mm (2" input to output) In-line protection from water backflow or siphoningIn-line protection from water backflow or siphoning Tru... read+

TruDesign Ball Valves are designed and made in New Zealand for use in marine applications above and below the water line. They comply with ISO 9093-2 and certified by Bureau VERITAS and IMCI. They also comply to ABYC H-27 500Lb standard when used with TruDesign Skin Fitting (Thru Hulls) The body of the Ball Valve is manufactured in glass-reinforced nylon composite with high impact and tensile s... read+

TruDesign Load Bearing Collars are designed for use with TruDesign Skin Fittings and Ball Valves.With the Collar in place, the Skin Fitting-Ball Valve-Hose Tail assembly will withstand a 500 lb (227 kg) static force applied to the Hose Tail end of the assembly, for a minimum of 30 seconds – complying with North American ABYC H-27 standards. Note: TruDesign 1 1/4", 1 1/2" 2" Skin Fittings ... read+

Suitable for underwater use, TruDesign range of Skin Fittings are certified by the International Marine Certification Institute (IMCI) and Bureau VERITAS to ISO 9093-2.They also comply with ABYC H-27 500Lb standard when used in conjunction with the TruDesign ABYC collar.  Designed and made in New Zealand, the Skin Fitting body and nut are moulded from a glass-reinforced nylon composite. Hi... read+

Suitable for underwater use, TruDesign range of Skin Fittings are certified by the International Marine Certification Institute (IMCI) and Bureau VERITAS to ISO 9093-2. They also comply with ABYC H-27 500Lb standard when used in conjunction with the TruDesign ABYC collar.   Designed and made in New Zealand, the Skin Fitting body and nut are moulded from a glass-reinforced nylon composite. ... read+

Ball valve spanners for easy installation of ball balves • Manufactured from a glass reinforced nylon composite - High strength and light weight. • Immune to corrosion and electrolysis - Long life with no concerns over decreased performance due to corrosion. • Chemical resistant - Impervious to diesel, petrol and antifouling paints. • UV resistant - These fittings will not break... read+

• Compatible with all hull types - Can be used on aluminium, steel, wood or GRP hulls up to 100mm thick • Immune to corrosion and electrolysis - Long life with no concerns over decreased performance due to corrosion • Chemical resistant - Impervious to diesel, petrol and antifouling paints • UV resistant - Will not degrade or discolour with ultraviolet light from the sun • High quality surface ... read+

• Designed and manufactured in New Zealand. • Manufactured from a glass-reinforced nylon composite - High strength, durable and light weight • Compatible with both Domed and Recessed head TruDesign Skin Fittings from ¾" to 2" in size • Positive 'click' to notify once properly engaged with the Skin Fitting • Handles for clean and easy handling of a Skin Fitting with sealant o... read+

Superior composite thru-hull solution for reduced drag in below waterline applications   For use below the water line TruDesign Skin Fittings are certified by the International Marine Certification Institute (IMCI) & Bureau Veritas to meet; ISO 9093-2 Small craft -- Seacocks and through-hull fittings -- Part 2: Non-metallic. They also comply with ABYC H-27 when used in conjunction with... read+

Superior composite thru-hull solution for reduced drag in below waterline applications For use below the water line TruDesign Skin Fittings are certified by the International Marine Certification Institute (IMCI) & Bureau Veritas to meet; ISO 9093-2 Small craft -- Seacocks and through-hull fittings -- Part 2: Non-metallic. They also comply with ABYC H-27 when used in conjunction with the T... read+

Superior composite connection for fitting hose to threaded fittings. TruDesign Tails are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres within the nylon composite provides dramatic strength, stiffness, toughness, and dimensional stability. TruDesign Tails eliminate the corrosion and electrical bonding problems associated with metallic fittings. Tail f... read+

Superior composite connection for fitting hose to threaded fittings TruDesign Long Thread 90° Tails are designed to screw into the range of Ball Valves but can also be used in many applications. Moulded in glass-reinforced nylon composite these Tails are also suitable for use in contact with petrol and diesel fuels. TruDesign Tails eliminate the corrosion and electrical bonding problems associa... read+

The most versatile Y-valve on the market today. The TruDesign Aquavalve (Y valve) is designed and made in New Zealand. Legislation in many countries dictates the use of holding tanks near shore, or in defined areas. By installing a diverting valve (Y Valve), the user has the choice to divert black water to a holding tank or directly overboard when circumstances allow. Features: • Manufac... read+

The Tru-Design Aquavalve is the most versatile valve on the market today. A range of fittings is available to suit the variability of marine plumbing applications. These fittings can be used on the Aquavalve, Aquavalve through Bulkhead, Electronic Aquavalve or 3 Way Connector. Straight Tails are suited to standard sizes of tubing. Tails come with a thicker Blue Seal to allow the fitting to be r... read+

The Tru-Design Aquavalve is the most versatile valve on the market today. A range of fittings is available to suit the variability of marine plumbing applications. These fittings can be used on the Aquavalve, Aquavalve through Bulkhead, Electronic Aquavalve or 3 Way Connector. Aquavalve 90° Tail fittings are suited to the most common sizes of tubing used in marine plumbing. Tails come packaged ... read+

The Tru-Design Aquavalve is the most versatile valve on the market today. A range of fittings is available to suit the variability of marine plumbing applications. These fittings can be used on the Aquavalve, Aquavalve through Bulkhead, Electronic Aquavalve or 3 Way Connector. Aquavalve 120° Tail fittings are suited to the most common sizes of tubing used in marine plumbing. Tails come packaged... read+