Holders

Wall mount bracket designed specifically for 12-inch displays, ensuring a stable and secure viewing position in the cabin or console. Allows for a firm and durable installation for your Simrad GO12 or B&G Vulcan 12 chartplotters, optimizing space and ergonomics. Manufactured with robust materials to withstand marine conditions and ensure equipment protection. Technical details Wall mount b... read+

Dashboard mount kit designed for the installation of Simrad GO7 XSR plotter and Vulcan 7R remote control. Key benefits Made of corrosion-resistant material, the bracket allows secure and stable mounting on the console. The installation is direct, without the need for structural modifications to the panel, ensuring a clean and professional integration. Intuitive control The design optimizes the ... read+

Mast bracket specifically designed for the B&G Nemesis 9 sailing display, ensuring an optimal viewing position for the helmsman. Its robust construction guarantees device stability in demanding sailing conditions. Compatible with the Nemesis series, this accessory facilitates secure and precise installation on the boat's structure. Technical details Mast bracket specifically designed for t... read+

Gimbal mount designed specifically for 16-inch displays from the NSS-4 and Zeus SR series, allowing smooth tilt and rotation for optimal visibility at any angle. Its robust construction ensures a secure and stable installation, ideal for demanding marine environments. Compatible with the full range of Simrad plotters, ensuring seamless integration with the vessel's navigation and control system... read+

Gimbal mount specifically designed for 12-inch Simrad NSS 4 and Zeus SR displays, allowing smooth tilt and orientation adjustment for optimal visibility in any cabin position. Built with corrosion-resistant materials, this mount ensures a secure and stable installation, optimizing user ergonomics while navigating. Technical details Gimbal mount specifically designed for 12-inch Simrad NSS 4 an... read+

Flush mount bracket made of stainless steel, specifically designed for Active Imaging HD transducers. This accessory allows for a discreet and secure installation, protecting the equipment in marine environments. Compatible with the Simrad Active Imaging HD sonar range. Technical details Stainless steel flush mount bracket for Active Imaging HD transducers Corrosion-resistant material for dema... read+

Simrad PB30 pedestal bracket, specifically designed for the installation of Simrad plotters on flat surfaces. This mounting accessory provides a stable and secure base for navigation screens, allowing vertical or horizontal orientation depending on cabin configuration. Manufactured to ensure a firm and durable fix in marine environments. Technical details Simrad PB30 pedestal bracket Material:... read+

Simrad PB90 90 mm pedestal bracket, designed for the secure and stable installation of chartplotters and displays on boats. With a height of 90 mm, this accessory allows firm and durable mounting in demanding marine conditions. Manufactured to ensure stability and resistance, it facilitates optimal viewing of navigation devices in portrait or landscape orientation. Technical details Simrad PB9... read+

Official Simrad gimbal bracket designed exclusively for 10-inch displays of the NSS 4 and Zeus SR series. Allows smooth tilting and rotation for optimal visibility in any position. Its robust construction ensures a secure and stable fit, facilitating vertical or horizontal adjustment according to navigation needs. Ideal for improving ergonomics and usability of the equipment on the console. Tec... read+

VESA mount adapter kit specifically designed for the Simrad NSS16 evo2 plotter. Key benefits This adapter allows professional installation of the unit on standard VESA mounts, ensuring stable and secure mounting. Pack contents The kit includes all necessary components to adapt the display to various navigation setups, ensuring precise alignment and comfortable access to the touchscreen. All-wea... read+

Dash mount kit designed specifically for 16-inch displays of the Simrad NSS evo2 and Zeus2 series. This structural bracket ensures a secure and stable installation, optimizing visibility and access to the chartplotter while underway. Compatible with 16-inch models from both ranges, it allows for a clean and robust integration into the boat's console. Technical details Dash mount kit for 16-inc... read+

Transom mount designed specifically for Simrad SS3D and TTLSCN SKIMMER transducers. This accessory ensures a secure and stable installation on the stern of the boat, allowing for precise sensor alignment for optimal signal transmission. Built to withstand marine conditions, it facilitates seamless integration with high-performance navigation and sonar systems. Technical details Transom mount d... read+

This plastic transom mount bracket is specifically designed for Structure Scan 3D and Total Scan transducers. The piece allows for direct and secure installation on the stern of the vessel. Key benefits It is ideal for mounting the transducers directly to the boat's transom. It also offers the option to fixate on the jackplate, providing a stable location for the sensors. Furthermore, the desig... read+

This replacement fairing block is specifically designed for standard Structure Scan 3D thru-hull transducers. It is important to note that this fairing is not compatible with combined Structure Scan 3D and CHIRP transducers. Key benefits The design allows the block to be cut to the required deadrise angle, ensuring precise installation and optimal sonar performance. By adapting to the hull shap... read+

The Active Target™ Trolling Motor Shaft Mount Kit ensures secure and precise transducer installation on the trolling motor shaft, optimizing fish and bottom detection while underway. Rated IP67 and operating between -15°C and 55°C, this device guarantees reliability in demanding marine conditions. It is compatible with HDS Live, HDS Carbon, and Elite FS series via Ethernet, facili... read+

Robust mounting kit for the precise installation of the Active Target TRM transducer on the bow or hull. Designed for demanding marine environments, it features IP67 water and dust protection and a 100 Mbit Ethernet connection for optimal signal transmission. Compatible with HDS Live, HDS Carbon, and Elite FS plotters. Resistant to vibration and extreme temperatures (-15°C to 55°C). Tec... read+

Robust mount for installing Active Target™ transducers on trolling motors, designed for demanding marine environments with IP67 waterproof rating. Key benefits Enables high-definition fish and bottom detection while moving. Built to withstand 100,000 cycles of 20 G shock and operates in temperatures from -15°C to 55°C, ensuring reliable performance and secure installation. Integra... read+

Active Target™ Transom Mount Kit designed to integrate active sonar technology with Simrad and B&G chartplotters. Robust construction with IP67 waterproof rating, suitable for demanding marine conditions. Integration and compatibility 100 Mbit Ethernet connectivity for HDS Pro/Live/Carbon and Elite FS. Key benefits Power consumption: 1.5A @ 13.8VDC (max). Operating temperature range: ... read+

Dashboard mounting kit specifically designed for 7-inch Simrad NSX series displays. Enables secure and stable installation on the boat's console or navigation panel. Includes all necessary components for a robust and professional fix. Technical details Dashboard mounting kit specifically designed for 7-inch Simrad NSX series displays Enables secure and stable installation on the boat's console... read+

Dashboard mounting kit specifically designed for the installation of 9-inch Simrad NSX series chartplotters. This accessory allows for a secure and stable integration into the boat's console, ensuring a professional installation and comfortable screen access. Compatible with NSX 3009 models. The kit includes all necessary components for a robust and functional fix. Technical details Dashboard ... read+

Catching fish is easier when you can see them interacting with structure and responding to your lure in real time with the high-resolution Active Target 2 Live Sonar. This system allows you to quickly recognize if your lure presentation is working or if you need to make adjustments to attract fish, providing information that is harder to obtain with traditional sonar or structure imaging. Key b... read+

The Trolling Motor Shaft mount for Active Target 2 XL Transducer is compatible with Ghost® and Ghost® X Trolling Motors and other 27-33mm diameter round shafts/poles. This revolutionary design has a cam-lock style clamp, making it easy to install. Key benefits The Active Target 2 XL shaft mount allows for trouble-free adjustment between Forward XL/Down XL views and Scout XL positions (S... read+

This optional mounting kit for trolling motors is specifically designed for Active Target 2 XL transducers and is compatible with Lowrance Recon trolling motors. The revolutionary design utilizes the Active Target mounting points on the Recon lower unit rather than the shaft, ensuring a secure and straightforward installation. Key benefits The mount allows for seamless adjustment between Forwar... read+