Holders

This kit includes a vertical base, single swing arm and marine electronics mounting plate. The included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device. read+

The RAM fish finder Deck Kit with Dual Marine Electronic Mount (RAM-FF1-D-115-2) is a robust, powder-coated aluminum bracket configured with two D size fish finder mounts that allows you to mount two fish finders side-by-side. Whether you're trolling deep waters or scanning shallow coves, this heavy-duty mount helps you take in more data for smarter navigation and better results. Built for vers... read+

The RAM fish finder Deck Kit with Humnonbird Helix 8-10 & Xplore Mount (RAM-FF1-D-202-25-202) is a robust, powder-coated aluminum bracket configured with a single D size fish finder mount that allows you to mount two Humminbird fish finders simultaneously. Whether you're trolling deep waters or scanning shallow coves, this heavy-duty mount helps you take in more data for smarter navigation and ... read+

The RAM fish finder Deck Kit with Dual Humminbird Helix 8-10 & Xplore Mount (RAM-FF1-D-202-25-202-2) is a robust, powder-coated aluminum bracket configured with two D size fish finder mounts that allows you to mount two Humminbird fish finders side-by-side. Whether you're trolling deep waters or scanning shallow coves, this heavy-duty mount helps you take in more data for smarter navigation and... read+

The RAM-109HU consists of a 6" long bent swing arm mounted on a horizontal surface base. At the device mounting end is a rectangular 6.25" x 2" plate. There are two pivoting points on the mount: one at the base of the swing arm and one at the center of the rectangular plate. Each pivoting point allows a complete 360-degree rotation. read+

The RAM single swing and socket arm mount includes a 6" straight swing arm mounted on a horizontal surface mounting base. At the end of the mount is a rectangular 6.25" x 2" top base. The bolt pivoting point of the mount allows a 360 degree rotation. read+

The RAM single swing arm mount consists of a 6" long swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation. read+

The RAM single swing and socket arm mount includes a 6" straight swing arm mounted on a horizontal surface mounting base. At the end of the mount is a rectangular 6.25" x 2" top base. The pivoting point of the rectangle base allows 180 degree rotation, the swing arm allows a 360 degree rotation. read+

The RAM Composite Universal Marine Electronic Mount (RAP-B-111U) is a kit intended for lightweight mounting for marine GPSes, CB radios, ham radios, gimbal brackets, and more. It comes with a 2" x 2.5" rectangle base, medium-length double socket arm, and 6.25" x 2" rectangle adapter plate. The adapter plate is pre-drilled with multiple hole combinations, including the universal Amps hole patter... read+

The RAP-B-107-1U consists of a composite 2.5" diameter round base with the universal AMPs hole pattern, composite double socket arm and connecting Humminbird/Eagle/Lowrance marine base. The mount is designed with the RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm. This allows for almost infinite adjustment and perfect view... read+

The RAP-B-101U-G4 consists of a 2.5" diameter round base with the universal Amps hole pattern, double socket arm and round adapter base that attaches directly to the bottom of the Garmin echo and Striker 4 Series. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. This with RAM's rubber ball and socket technolog... read+

The RAP-B-107-1B-354-TRA1U consists of a Track Ball base, composite double socket arm and connecting Humminbird/Eagle/Lowrance marine base. The mount is designed with the RAM 1" diameter rubber ball and socket system that has adjustment points at both ends of the double socket arm. This allows for high adjustability to achieve perfect viewing angles. This kit is compatible with virtually any tr... read+

The RAM double swing arm mount includes two 6" long bent swing arms mounted on a vertical surface mounting base. At the end of the device mount is a rectangular 6.25 x 2" top base. The pivoting points of the mount allow a complete 360 degree rotation. read+

The RAM-101-RM1U consists of a 6 inch double socket arm and two 3.68" round bases. The top round base contains pre-drilled holes that connect to Raymarine devices listed below. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect... read+

The RAM-101-G2U consists of a 6 inch double socket arm and two 2.5" diameter round bases with the universal Amps hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both ends of the double socket arm. With a twist of the arm knob, you can move the RAM-101-G2U mount to your optimum viewing position. Compatible with Garmin mari... read+

Garmin Adapter for quarter-turn mount to friction tab mount read+

The RAP-B-107U consists of a composite 2.5" diameter round base with the universal AMPs hole pattern, composite double socket arm and connecting Humminbird/Apelco marine adapter base. The mount is designed with the RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; thus allowing for almost infinite adjustment and perfect view... read+

The RAM Universal Composite Marine Electronic Mount (RAP-111U) is a rugged, fully adjustable mounting solution built for dependable performance on the water. Made from high-strength composite materials, this system includes a C size medium-length double socket arm, a 2" x 1.7" square drill-down base, and a 0.25" x 2" rectangular adapter plate for secure device attachment. The rectangular adapte... read+

The RAP-202-153-202 features a round 2.5" diameter base with a Universal AMPs Hole Pattern, a double socket arm, and a 1.5" x 3" rectangular base.   Base Specifications • Round Base: 2.5" diameter with a Universal AMPs Hole Pattern. • Rectangular Base: 1.5" x 3" with four holes featuring a center-to-center pattern of 1" x 2.5".   Material Composition • Construction: The round base and... read+

The RAM-SG-D-111U consists of a 3.68" diameter round base, Standard Length double socket arm, 11" x 3" rectangular base, RAM mixed combination Pin-Lock security nut/knob and key knob for Gimbal Brackets. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will ... read+

The RAM-SG-111U consists of a 2.5" diameter round base, Standard Length double socket arm, 6.25" x 2" rectangle base, RAM mixed combination Pin-Lock security nut/knob and key knobs for Gimbal Brackets. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your... read+

The RAM-SG-B-111U consists of a 2.5" diameter round base, standard length double socket arm, 6.25" x 2" rectangle plate, RAM mixed combination Pin-Lock security nut/knob and key knobs for Gimbal Brackets. The 6.25" x 2" rectangle plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with ... read+

The RAM-S-D-111 consists of a 3.68" diameter round base, Standard Length double socket arm, 11" x 3" rectangular base, RAM mixed combination Pin-Lock security nut and key knob. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic... read+

The RAM-S-D-111U-C is a mounting solution featuring a 3.68" diameter round base, a short length double socket arm, an 11" x 3" rectangular base, and a RAM mixed combination Pin-Lock security nut and key knob.   Round Base Features • Pre-drilled holes for secure installation • Two holes at 180 degrees • Three holes at 120 degrees   Rectangular Base Features • Different combinations of ... read+