24 V DC - 230 V AC / 60 Hz 5 kVA inverter (P30), designed to operate in demanding conditions. It delivers 4 kW continuous at 40 °C, 9 kW peaks, 92 % efficiency and galvanic isolation to protect sensitive equipment and ensure a stable supply.
The Mass Sine 24/5000 is designed to power complex loads on board or in mobile and fixed applications. Its high-frequency technology and pure sine wave combine to eliminate humming, improve efficiency and prevent tripping or damage to delicate electronics.
It features an automatic saving mode to extend battery autonomy without affecting low-consumption loads. It can be integrated into MasterBus networks to centralise control via remote panel or EasyView display (with MasterBus interface). Professional connections and compatibility with Masterswitch/Systemswitch help automatically manage the available power source (shore power, generator or inverter).
Key features
- Pure sine wave 230 V / 60 Hz to protect sensitive equipment.
- P30 power 5 kW and 4 kW continuous at 40 °C to sustain high consumption.
- 9 kW peak to start loads with high inrush current.
- 92 % efficiency and economy mode to maximise available energy.
- Galvanic isolation and typical THD < 5 % to improve supply quality.
- MasterBus integration (via interface) to monitor and control the inverter from a single system.
- Compatibility with Masterswitch/Systemswitch to select and switch power sources.
- Protections: battery undervoltage/overvoltage, overtemperature, overload and short circuit.
- Robust design: full-load operation up to 40 °C (with derating above) and ambient range ?25 to 80 °C.
Key specifications
- Input (battery): 24 V DC; recommended capacity > 400 Ah.
- Output: 230 V AC / 60 Hz (±0.01 Hz); pure sine wave; accepts any cos ?.
- Power: P30 5,000 W @ 40 °C; continuous 4,000 W @ 40 °C; peak 9,000 W.
- Efficiency: 92 %; typical THD < 5 %.
- No-load consumption: ?6 W (ON) / ?1.2 W (saving mode) to reduce standby consumption.
- Galvanic isolation: yes (isolated AC output).
- Battery thresholds: low cut-off 19 V / reconnection 22 V; high cut-off 32 V / reconnection 30 V.
- Input current at rated load: ?230 A; max. DC ripple 5 % RMS.
- Electrical protection: IP23; natural/forced cooling.
- Fuses and wiring: minimum 1 × 250 A (slow-blow) or 2 × 125 A; minimum cross-section 2 × 70 mm².
- Dimensions (H × W × D): 470 × 315 × 254 mm; weight 19 kg.
- Indicators and control: front LEDs; C4-RI / EasyView 5 remote control via MasterBus.
- Compliance: CE, E-mark, ABYC A-31.
Be the first to leave your opinion
0/5Write your opinion about this product
Autumn offers
