New Products

The Simrad MO16-T is a 15.6-inch widescreen monitor featuring sunlight viewable capabilities and touch screen functionality, suitable for vessels larger than 35 feet. This device provides intuitive control over your entire Simrad glass bridge system via a bright and clear 15.6-inch display. Intuitive control With familiar gestures like pinch-to-zoom, operating your bridge displays becomes as si... read+

The drive is a rotary mechanical autopilot drive system which makes it simple and economical to fit an autopilot on smaller powerboats with mechanical push-pull cable steering. The drive unit is suitable for standard straight shaft configurations and incorporate a drive motor, solenoid clutch and integrated rudder feedback (RFB) capability. Key benefits The compact drive unit completely replace... read+

The Simrad SIMKIT-3 conversion kit enables the integration of Micro-C devices into the Simnet data network. This complete package facilitates the connection of sensors and accessories, ensuring reliable data communication. Key benefits It includes all necessary installation components: 2m Simnet cable (ref. 24005837), termination plug (ref. 24005894), 2m power cable with terminator (ref. 240059... read+

AC70 Printed Circuit Board (PCB) assembly, an essential electronic component for Voith Schneider propeller control systems. This module ensures proper signal management from the control unit, guaranteeing reliability and precision in steering maneuvers. Designed for direct integration into B&G navigation electronics, this technical spare part is crucial for maintaining optimal propulsion sy... read+

The Simrad RF70N rudder position sensor is a medium-duty device designed for accurate steering angle measurement. Based on the RF45X mechanics, it features a CAN-bus interface for direct integration with navigation and rudder control systems. Its robust construction ensures reliability in demanding marine environments. Technical details Simrad RF70N medium-duty rudder position sensor with CAN-... read+

Official Simrad mounting bracket (Ref. 000-10590-001) designed exclusively for AP70 and AP80 control heads. This installation kit ensures secure and stable console mounting, allowing correct screen orientation in portrait or landscape mode. The kit includes all necessary components for a direct, professional setup, ensuring compatibility and optimal performance of the navigation system. Technic... read+

This standoff frame enables the FU80, NF80, or QS80 autopilot remote to be mounted external to a bulkhead or other surface, offering a simple and cost-effective installation option. This external mounting solution is ideal where flush mounting is impractical or impossible. Integration and compatibility The kit is specifically designed to be compatible with the FU80, NF80, and QS80 models. Key b... read+

Simrad SD80 Printed Circuit Board (PCB) assembly. This electronic component serves as the control interface for the vessel's steering and thruster systems. Designed to accurately manage control signals, it ensures proportional and reliable response for the rudder and thrust systems, guaranteeing the integrity and performance of the navigation system. Technical details Simrad SD80 Printed Circu... read+

Original Simrad AD80 PCB assembly. This replacement electronic component is designed to ensure signal integrity in Simrad navigation systems, ensuring compatibility and proper operation of compatible devices. Technical details Original Simrad AD80 printed circuit board (PCB) assembly Replacement electronic component for Simrad navigation systems Ensures signal integrity in compatible equipment read+

The Simrad SI80 signal interface unit is a 12/24 V DC signal interface module specifically designed for Simrad AP70 and AP80 autopilot systems. This device provides four IEC 61162-1 (NMEA 0183) input and output channels, enabling robust data integration. Integration and compatibility In addition to signal connections, the SI80 includes a Sim Net power supply to power connected components. Power... read+

The Simrad SD80 Solenoid Drive Interface is designed for rudder or thruster control, offering a robust solution for Simrad AP70 and AP80 autopilot systems. This device manages additional drive units or thrusters, ensuring seamless integration with navigation electronics. Intuitive control The system supports both on/off and proportional control, adapting to the specific needs of each vessel. Fu... read+

The Simrad AD80 analog drive interface is designed for rudder or thruster control with Simrad AP70 and AP80 autopilot systems. This drive interface enables analog or proportional control of the rudder or thrusters using analog voltage or low-level current. Key benefits The device offers the possibility of frequency, voltage, or current angle feedback for enhanced precision. It also features a d... read+

The Simrad AC70 is an autopilot computer for rudder control with Simrad AP70 and AP80 systems. With an output of 30/50 A, the motor current has sufficient power output to control drive units on boats over 40ft in length, depending upon rudder size and displacement. Integration and compatibility NMEA0183® Connectivity allows you to connect to an AP70 controller or NSS, NSE or NSO navigation ... read+

The Simrad NF80 steering remote offers intuitive controls and a 1.7-inch display that can be used to adjust route, heading, rudder angle, or autopilot mode from anywhere on board. This device provides dedicated steering controls for your fully integrated autopilot system, complementing the touchscreen controls on your chartplotter. Intuitive control Adding a remote enables autopilot control fro... read+

The Simrad QS80 dedicated steering remote offers intuitive controls and a 1.7-inch display for adjusting course, heading, rudder angle, or autopilot mode from anywhere on board. This remote complements the touchscreen controls on your multifunction display, providing dedicated steering for your fully integrated autopilot system. Intuitive control It enables autopilot control from multiple stati... read+

The Simrad FU80 steering remote offers intuitive controls and a 1.7-inch integrated display that can be used to make course, heading, rudder angle, or autopilot mode changes from anywhere on board. Adding this remote to your system provides dedicated steering controls for your fully integrated autopilot system, complementing the touchscreen controls on your multifunction display. Intuitive cont... read+

The Simrad WS80 Wind Sensor is designed to provide accurate and reliable wind data in demanding marine environments. This device transmits wind data in NMEA 0183 format, a standard widely used in the marine industry for communication between instruments. Integration and compatibility The connection is made via an RS485 (or RS422) data interface, ensuring robust and interference-free signal tran... read+

4.5 m interface cable designed to connect Evinrude engines to NMEA 2000 networks, enabling engine data visualization on Simrad plotters. Includes a T-connector for straightforward installation. Ideal for integrating engine telemetry into navigation systems. Technical details 4.5 m interface cable for Evinrude engines Compatible with NMEA 2000 data networks Enables engine data visualization on ... read+

The Simrad Yamaha Engine Interface Cable allows direct connection to Yamaha outboard engines without the need for the Yamaha Command Link Plus system. This accessory is compatible with a wide range of F, T, LF, and Z series models, covering power outputs from 50 to 300 HP, specifically those manufactured in 2006 or later. Integration and compatibility Installation requires an NMEA 2000 network,... read+

Water speed sensor (plotter) spare part for B&G H5000 and H3000 systems. This component replaces the original sensor to maintain the integrity of the NMEA 2000 network. Ensures accurate boat speed readings in demanding marine conditions. Compatible with H2000 and other selected systems. Technical details Water speed sensor for B&G H5000 and H3000 systems Compatible with H2000 and other... read+

The Simrad RAM T4 24V hydraulic ram is designed to deliver high power efficiency, ensuring maximum performance with minimum power consumption. This actuator is suitable for yachts equipped with cable or rod steering systems. To ensure long-term reliability of the navigation system, it is recommended to use specific spare parts kits, such as the RAM-SPRS-T3 or RAM-SPRS-T1 kits, as well as period... read+

Simrad NAVIOP SE NOVA+ LIGHT BOARD,W/ HARNESS reference NA05-0003-H. read+

Internal control board Simrad model NA05-0003, also known as Nova+ Light Board. Key benefits This electronic component is essential for the integration and management of advanced functions in Simrad and Navionics navigation systems. Integration and compatibility It enables connection and communication with peripherals and sensors, ensuring signal stability and system response. All-weather visib... read+