Raymarine Ray90 Fixed-mount VHF radio w/ speaker optional second station w/ DSC

Sleek, modular, black box VHF Radio Systems allowing for discreet mounting and dashboard space saving.

Ray90 VHF

• Black box transceiver

• Includes Remote Passive Speaker and cable

In the box

• Ray90 / Ray91 VHF DSC Radio base station (including fitted power and data cable).

• Wired handset holster.

• Wired handset.

• Wired handset adaptor cable with RCA Audio 400 mm (1.3 ft)

• Passive speaker and bezel

• Passive speaker mounting gasket

• 4 x M4x25 screws (for wired speaker mounting)

• Documentation

• 4 x M4x25 screws (For base station mounting)

• 6 x M4x12 screws (For Handset holster and hook plate mounting)

• DeviceNet to SeaTalkng 1 m (3.28 ft) adaptor cable.

• Handset hook plate.

• Through panel cable mounting plate.

• Through panel cable mounting plate gasket

• Through panel cable mounting nut.

• Through panel cable mounting plate screws x 3

• Through panel cable mounting dust cap.

Specifications

Power specification

• Nominal supply voltage: 12 V dc (with over voltage protection)

• Operating voltage range: 10.2 V dc to 16 V dc

• Fuse requirements: • Inline fuse = 10 A; • Thermal breaker = 7 A

• Current consumption: • Less than 6 A at high power (13.6 V); • Standby: 600 mA; • Receive: 2 A; • Loud hailer: 3 A (8 Ω) / 6 A (4 Ω)

• LEN: 1

Environmental specification

• Operating temperature: -25ºC (-13ºF) to +55ºC (131ºF)

• Storage temperature: -25ºC (-13ºF) to +70ºC (158ºF)

• Relative humidity: 95%

• Water proofing: IPx6 & IPx7

Connections

• Wired handsets: x 2 via HS1 and HS2 connectors

• Wireless hub: x 1 via Hub connector

• GNSS (GPS) antenna: x 1 via GPS connector (TNC)

• VHF antenna / splitter: x 1 via VHF connector (50 Ohm SO239)

• NMEA 0183 input: x 1 via bare ended wires on data cable

• NMEA 0183 output: x 1 via bare ended wires on data cable

• NMEA 2000 / SeaTalkng: x 1 via N2K (DeviceNet) connector

• Loud hailer: x 1 via bare ended wires on data cable.

VHF Transmitter

• Channels: All available US, International and Canadian VHF marine bands

• Frequency Range: 156.025 MHz to 157.425 MHz / 155.500 MHz to 161.425 MHz (Private channels)

• Frequency stability: +/- 1.5 ppm

• Channel Spacing: 25 kHz

• Power Output: • Low power setting — 1 W; • High power setting — 25 W

• Spurious emissions: Better than –36 dBm at 25 W (Less than 0.25 μW)

• Maximum deviation: +/- 5 KHz

• Antenna impedance: 50 Ohms (typical)

Receiver

• Receiver type: Double conversion super heterodyne

• Channels: All available US, International and Canadian VHF marine bands

• Frequency range: 156.050 MHz to 163.275 MHz / 155.500 MHz to 161.425 MHz (Private channels)

• Sensitivity: Better than 1 microvolt EMF @ 20dB SINAD

• Squelch sensitivity: Less than -2 dBμ EMF

• Hum and noise: Better than -40 dB

• Audio distortion: Less than 10%

• Receiver sensitivity: • Distance — 119dBm (0.25uV) @ 12dB SINAD (typical); • Local — 110dBm (0.7uV) @ 12dB SINAD (typical)

• Adjacent channel selectivity: More than 70 dB

• Spurious response rejection: More than 70 dB

• Inter modulation rejection: More than 68 dB

GNSS (GPS)

• Channels: 72

• Cold start: 29 seconds

• Receiver IC Sensitivity: • Tracking and navigation = -167 dBm; • Reacquisition = -160 dBm; • Cold start = -146 dBm; • Hot start = -156 dBm

• GNSS compatibility: • GPS; • GLONASS; • Beidou

• SBAS compatibility: • QZSS; • WAAS; • EGNOS; • MSAS; • GAGAN

• Special features: Active Jamming and Interference Reduction

• Operating frequency: • GPS L1 C/A; • GLONASS L10F; • Beidou B1

• Signal Acquisition: Automatic

• Almanac Update: Automatic

• Geodetic Datum: WGS-84 (alternatives available through Raymarine MFD)

• Refresh Rate: 20 Hz (20 times per second Concurrent GNSS)

• Antenna: • External — An external passive antenna is required

• Horizontal Position Accuracy: • Autonomous = 2.5m (8.2 ft); • SBAS = 2m (6.56 ft)

AIS (Ray91 only)

• Class type: Receiver only