Universal Mounts

read+

Simply choose your preferred mounting location and the possibilities become endless with the RAP-B-138-AU. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach.   Shock and Vibration Dampening • RAM’s patented design also dampens shock and vibration helping to ext... read+

The RAP-B-138U consists of a composite 2.5" diameter round base that contains the universal AMPs hole pattern, double socket arm and diamond base adapter.   Adjustment and Compatibility • Patented Ball and Socket: The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinit... read+

The ideal mounting point for lightweight electronics has been hiding in plain sight all this time. RAM now offers a mirror adaptor with ball that not only looks amazing, but performs beyond expectation. Simply remove your factory mirror, slide the RAM adaptor over the factory windscreen button, and tighten in place. This great little product replicates the factory button on the cab facing side ... read+

The RAP-B-121-238U, universal glare shield/yoke mount, is ideally suited for a day on the wing and yet easily removed for travel in the flight bag. Both strong and lightweight, this new clamping base is perfect for numerous electronic devices commonly found in the cockpit. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, or add a second ball to mou... read+

The RAP-299-3-B-102U consists of a double socket arm, two diamond bases, and a RAM-A-CAN II cup holder base. The diamond bases measure 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standar... read+

The RAM Tough-Claw is designed to be clamped to wheelchairs, rails, bars, and flat surfaces, enabling the use of the Microsoft Xbox Adaptive Controller. The controller attaches directly to the included RAM diamond base adapter, which features a 1.5” ball and double socket swivel arm. This setup allows for a 90-degree tilt, enabling you to angle the adaptive controller exactly where you need it.... read+

This bedside mounting kit includes the large RAM Tough-Claw clamping base, 9” extension pole, swiveling double socket arm, and a RAM round ball plate. The RAM Tough-Claw attaches with the twist of a knob to bedside rails and bars that range from 1” to 2.25” in outer diameter. In addition, the 9” long extension pole, swiveling double socket arm, and round ball plate can be easily adjusted to kee... read+

The RAM Trolling Motor Stabilizer - Tough-Claw .625" - 1.14" Long Arm (RAP-400-D-202U) helps protect your boat and trolling motor by preventing unwanted movement and vibration while the motor is stowed during travel. This kit includes a small RAM Tough-Claw base, a C size long double socket arm, and a round base adapter. The Tough-Claw clamps directly onto the trolling motor shaft, delivering a... read+

The RAP-101U is a high strength composite flat surface mount consisting of a double socket arm mount and two 2.5" diameter round bases with the universal Amps hole pattern.   Patented Design • Adjustment: The mount features a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. • Flexibility: Rubber ball and socket technology allows fo... read+

The RAM Trolling Motor Stabilizer – Tough-Claw (RAP-400-202U) provides a secure mounting solution to keep trolling motor shafts from jostling around when not in use.   Secure Mounting • The RAM Tough-Claw allows you to quickly secure the shaft without tools. • The included small Tough-Claw is compatible with round, square, and irregularly shaped rails or bars from 0.625" to 1.5" in outer d... read+

The RAM-VP-SW1-89-240 consists of a 9" lower female Tele-Pole, 8" upper male Tele-Pole, double swing arm and 3.68" round base. The lower female Tele-Pole will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole bec... read+

The RAM-VP-SW1-45 consists of a 5" lower female Tele-Pole, 4" upper male Tele-Pole, double swing arm and 2.5" round base that contains the universal AMPs hole pattern. The lower female Tele-Pole will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post. Once the k... read+

The RAM-VP-SW1-129-240 consists of a 9" lower female Tele-Pole, 12" upper male Tele-Pole, double swing arm and 3.68" round base. The lower female Tele-Pole will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole b... read+

The RAM-VP-SW1-1218-240 consists of a 18" lower female Tele-Pole, 12" upper male Tele-Pole, double swing arm and 3.68" round base. The lower female Tele-Pole will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole... read+

Suction cups are one of the most convenient ways to mount portable electronics. RAM has a wide range of suction cups to choose from that have incredible holding power without an incredible price. Easy to afford and easy to use, we offer single, double, and now the RAM Triple suction cup base. This exceptional product allows the freedom to use and move your electronics like never before. Ideally... read+

The RAP-299-3-B-102AU is a pre-assembled cup holder mounting system that consists of a double socket arm, two diamond bases and RAM-A-CAN II cup holder base. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as ... read+

The RAM-VP-SW2-89-240 consists of a 9" lower female Tele-Pole, 8" upper male Tele-Pole, single swing arm and 3.68" round base. The lower female Tele-Pole attaches to all RAM vehicle bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole becomes... read+

This RAM No-Drill mounting system installs quickly and easily into the 2019-2026 Chevrolet Silverado and GMC Next Generation Sierra using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. The round ball ... read+

The RAP-274-1HU consists of the EZ-ON/OFF dual strap base and swivel diamond adapter base. Adjust the zip ties to attach to a variety of rails, from a minimum of 0.5" in diameter. With a press on the diamond adapter, the EZ-ON/OFF system allows for the quick release of the diamond adapter from the base. When connected, the diamond base can rotate to your optimum viewing position.   Compati... read+

The RAM-VP-SW1-47-240 consists of a 7" lower female Tele-Pole, 4" upper male Tele-Pole, double swing arm and 3.68" round base. The lower female Tele-Pole will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole. The height of the Tele-Poles, combined, can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole bec... read+