CEM

CEM Sbr self-priming electric pump with bronze single screw.• Consisting of a worm screw rotor revolving inside an NBR rubber stator.• These electric pumps are used in the marine sector to drain waste boxes, toilet black waters and particularly viscous liquids with small suspended bodies.• Bronze pump body, AISI316 stainless steel shaft and rotor, AISI316 stainless stee... read+

Single-phase alternating current electropump (50 Hz), widely used on board to supply fresh or salt water.Required for the operation of air conditioning systems.Consists of a pump body and impeller in bronze, and a shaft in stainless steel AISI 316.• Voltage: 230 V• Power: 150 W• Current: 1.2 A• RPM: 2800• Maximum flow rate: 40 l/min• Maximum head: 5 m• Outlets... read+

• Pump body in stainless steel AISI 304• Shaft in stainless steel AISI 316• Impeller, diffuser, and venturi tube in Noryl• Special anti-corrosion mechanical seal in ceramic/graphite/NBR• Self-priming after initial filling (requires a non-return valve)• High suction capacity• Commonly used for distributing pressurized water in onboard services (showers, kitchen... read+

Dynamically and statically balanced steel fan. Complete with pipe flange, both at inlet and outlet, and with a suction protection grid.Rotation• LD: left direction• RD: right direction Reference Voltage Rotation Power Consumo RPM Noise Max. capacity Max. pressure 16.102.07 24 V LD 120 W 6 A 2500 56 dBA 15 (m³/min) 47 mm H2O 16.102.08 24 V RD 120 W 6 A 2500 56 dBA 15 (m&sup... read+

Certified according to RINA testing rules, applied to materials and marine equipment.With an impeller in polypropylene, dynamically and statically balanced, with operating temperatures of -20 °C to +80 °C.Supplied as standard with a single rotating side protection net, or double on request (on both sides to ensure maximum safety). Reference Voltage Flux Grid Power Consumption RPM Noi... read+