Skip to content

I have bought other times here

I'm already a customer

I want to register

New customer

By creating an account at francobordo.com you can make your purchases quickly in our virtual store, check the status of your orders and check your previous operations.

Ahead! We were waiting for you.

Create an Account

Access the

Professionals Area

Register and take advantage of the discounts and advantages of being a Professional of Nautical

Join the more than 500 Nautical Professionals now

professional register

Fitting>Hatchs and Gates>

Hatches

ESCOTILLA REDONDA " LOW PROFILE" LEWMAR

De aluminio anodizado y metacrilato resistente a los golpes, de perfil muy bajo. Con pestaña de 15 mm. Aprobadas C.E. para montaje en cubiertas y cabinas. Tapa superior de abertura en cualquier posición y con resistencia ajustable. Marco superior de sólo 25 mm. y fuerte inclinación que les confieren una estética inigualable. Marco inferior mínimamente protuberante con un pequeño rebordeque, con...

679,90€

Seleccionar opciónTAX incl.

Lewmar Low Profile Hatch

• Lewmar Low Profile Hatch. • The profile projects only 25 mm above the deck. • CE approved for Area 2. • External handles allow the hatch to be opened from the deck, while friction levers hold the lid open in any position up to 95º. • Anodized aluminium frame for corrosion resistance and curved upper frame profile for greater...

259,90€

Seleccionar opciónTAX incl.

ESCOTILLA "OCEAN " LEWMAR

Aprobada C.E. para montaje en cubiertas y cabinas.Marco superior de tipo alto que incorpora una junta hueca de gran poder de estanqueidad.Marco inferior con reborde que limita la entrada del agua que corre por cubierta cuando la escotilla está abierta.Bisagras integradas no protuberantes.Nuevo sistema para sujeción de la tapa en cualquier posición de apertura, mediante comp...

539,90€

Seleccionar opciónTAX incl.

Nuova Rade Hatch Euro 1 White

● Rectangular cover hatch made of plastic material highly resistant to weathering and UV rays handle. ● Dimensions: 26.8 x 44.8 cm ● Color: White

134,80€

In StockTAX incl.

Nuova Rade Hatch Euro 2 White

● Rectangular cover hatch made of plastic material highly resistant to weathering and UV rays handle. ● Dimensions: 48 x48 cm (Inner 41.5 x 41.5 cm) ● Color: White ● Plexiglas thickness: 8 mm

242,90€

In StockTAX incl.

Nuova Rade Escape Hatch Euro 38 White

Round framed white portlight with a thick frame made of UV-resistant high-grade ASA, providing resistance to damage and chemical solvents. ASA (acrylonitrile styrene acrylate) filament is the perfect multi-purpose 3D printing thermoplastic, suitable for many different applications. Features: • UV resistant • 8 mm thick plexiglass window, that can stay open. • Desi...

144,90€

In StockTAX incl.

Nuova Rade escape hatch Euro 59 White

Round framed white portlight with a thick frame made of UV-resistant high-grade ASA, providing resistance to damage and chemical solvents. ASA (acrylonitrile styrene acrylate) filament is the perfect multi-purpose 3D printing thermoplastic, suitable for many different applications. Features: • UV resistant • 8 mm thick plexiglass window, that can stay open. • Designed for external use. •...

256,30€

It can be more than 30 daysTAX incl.

Lewmar pilot hatch sliding

● Sliding hatch designed for steering coverings and enabling ventilation and radiation. For flat mounting. The look of Pilot hatches perfectly matches Low e Medium Profile models. Code Model External Size X<->Y (mm) Profile size X1<->Y1 (mm) Length of race T (mm) Recess Flange projection 1945060 60 581 577 373 15 1945078 78 844 790 638 15

869,00€

Seleccionar opciónTAX incl.

Bomar Hatches Low profile Contour

● Made of aluminium white paint epoxy resins and fitted with smoked tempered glass; complies with EC standards; invisible hinges fitted onto the profile, opening with hinged stoppers and ventilating position. Code Opening (mm) Aperture required (mm) Outer (mm) Overhang (mm) 1972001 248x248 275x275 343x343 24 1972002 315x445 340x470 410x540 24 1972003 395x395 420x420 491x491 24 ...

489,50€

Seleccionar opciónTAX incl.

Bomar Flush hatches

● Smooth Bomar hatches are made from polycarbonate; equipped with safety handles, lockable on the inside and smoked glass polycarbonate, its placement is done at Code Size (mm) Colour Outer (mm) Net light (mm) 1991010BI 25 White 304x302 230x230 1991010NE 25 Black 304x302 230x230 1992710BI 25 White 394x521 318x445 1992710NE 25 Black 394x521 318x445 1996610BI 25 White 480x480 41...

484,50€

Seleccionar opciónTAX incl.

Bomar Circular Hatches Low profile Contour

● Made of aluminium, white lacquered with epoxy resins, hinged opening, smoked tempered glass; EC type approval. Code Opening (mm) Aperture required (mm) Outer (mm) Overhang (mm) 19.724.01 395 420 492 24 19.724.02 493 518 588 24 * Bomar sun-shades for hatches are designed for installation in a matter of minutes. Slide locking. With a special knob, the overlapping tabs sp...

764,00€

Seleccionar opciónTAX incl.

Vetus Escape Hatch PLANUS Type

Satin gloss anodised aluminum frame with rounded corners with 75mm radius and dark smoked 10mm acrylic lid. A friction hinge allows the hatches to remain at any angle up to 180º. Suitable for category A, Zone II designs. Ref External measurements A x B (mm) Hole dimensions C x D (mm) PLA45L 474 x 474 424 x 424 PLA50L 521 x 521 471 x 471

352,10€

Seleccionar opciónTAX incl.

Vetus Ventilation Hatch PLANUS Type

Satin gloss anodised aluminum frame with rounded corners with 75mm radius and dark smoked 10mm acrylic lid. A friction hinge allows the hatches to remain at any angle up to 180º. Suitable for category A, Zone II designs. Ref External measurements A x B (mm) Hole dimensions C x D (mm) PLA23L 280 x 280 230 x 230 PLA30L 350 x 280 300 x 230 PLA34L 390 x 260 340 x 210

181,50€

Seleccionar opciónTAX incl.

Vetus Deck Hatch PLANUS Type

Satin gloss anodised aluminum frame with rounded corners with 75mm radius and dark smoked 10mm acrylic lid. A friction hinge allows the hatches to remain at any angle up to 180º. Suitable for category A, Zone II designs. Ref External measurements A x B (mm) Hole dimensions C x D (mm) PLA32L 474 x 344 424 x 294 PLA40L 424 x 424 374 x 374

309,75€

Seleccionar opciónTAX incl.

Vetus Hatch Cover Flush FGH Type

Designed specifically for new boats. These hatches are the most suitable for new constructions since the cover is embedded to cover the hatch. After installation the hatches are completely embedded in the roof leaving it smooth and without visible lines. They are made of 12mm thick dark smoked acrylic with a polished anodised aluminum frame. Suitable for category A, zone II designs. Deck...

458,60€

Seleccionar opciónTAX incl.

Vetus Escape Hatch Type ALTUS Square

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio...

628,00€

Seleccionar opciónTAX incl.

Vetus Altus Low Profile D Shaped Escape Hatch

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio...

760,50€

Delivery in 7-10 daysTAX incl.

Vetus Escape Hatch Type ALTUS Circular

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio...

711,50€

Delivery in 7-10 daysTAX incl.

Vetus Cover Hatch Type ALTUS Square

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio...

530,60€

Seleccionar opciónTAX incl.

Vetus Cover Hatch Type ALTUS Circular

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio...

688,50€

Delivery in 7-10 daysTAX incl.

Vetus Ventilation Hat Type ALTUS Square

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio...

287,99€

Delivery in 7-10 daysTAX incl.

Vetus Altus Low Profile D Shaped Ventilation Hatch

Manufactured with a robust aluminum profile (height 21mm) and an anodised satin gloss frame and is suitable for category A, zina II designs. The acrylic has a thickness of 10mm and is dark smoky. They come with easy-to-handle adjusters, allowing the lid to remain open at almost any angle up to 90º. It can be installed on the cover and opened from inside and outside. It has a ventilation positio...

688,50€

Delivery in 7-10 daysTAX incl.

Vetus Escape Hatch Type LIBERO 470 x 470 mm

With hand-polished and anodised frame with rounded corners with 32 or 55mm radius and a 10mm thick dark smoked acrylic cover. The exhaust and deck hatches come with adjusters that allow the lid to remain open at almost any angles up to 90º. A special friction hinge allows the ventilation hatches to remain open at any angle up to 180º. The LIBERO type is suitable for designs of category A, zone ...

603,80€

In StockTAX incl.

Vetus Escape Hatch Type LIBERO 560 x 560 mm

With hand-polished and anodised frame with rounded corners with 32 or 55mm radius and a 10mm thick dark smoked acrylic cover. The exhaust and deck hatches come with adjusters that allow the lid to remain open at almost any angles up to 90º. A special friction hinge allows the ventilation hatches to remain open at any angle up to 180º. The LIBERO type is suitable for designs of category A, zone ...

675,80€

Seleccionar opciónTAX incl.

Ultraflex Carver

RULE OverBoard Panther

Select your language: