New Products

● Quickly and easily install or move fenders when mooring. Tie fender line onto key, then insert key into lock. Two flush mount stainless steel keys. Fasten with two #10 screws. Accepts up to 12.7 mm rope. ● Includes two units. Fasten with two # 10 screws ● Measures (width x height): 5 x 2.5 mm ● Distance between bolts: 30 mm read+

● 5 mm diameter and 30.5 m long braided line for use with the Attwood Anchor Lift System​ read+

● This convenient system drops the anchor at the turn of a button and stores it in the anchor mount housing when not in use.  Constructed of heavy gauge steel with durable powder coated finish and mounts on the bow or stern corners of most boats.  ● Anchor secures within anchor mount housing.  Mounts easily to bow or stern.  Deploy anchor with the simple twist of a... read+

● Easy-to-use anchor lift and pulley system supports anchors up to 9 kg with 6 to 12.7 mm diameter line (sold separately). ● Economical zinc-plated, steel anchor lift ● Nylon pulley system ● Steel Sheave controls anchor from any position read+

● Easy-to-use anchor lift and pulley system supports anchors up to 9 kg with 6 to 12.7 mm diameter line (sold separately). ● High-impact, reinforced nylon● Stainless steel shafts● Easy, pull-up, lock, and release read+

● Hose adaptor size 16 mm at 90° and vent fitted with valve to prevent water from getting into the hull completely; nylon body, polished stainless steel outer part, made in accordance with RINA and EC standards. ● These P-traps have been tested and certified by a third party lab to meet the ABYC weathertight and watertight requirements and ensure no liquid water will reach a fuel vent line, ca... read+

● These 2-pin bases for angled pole lights with locking collars are well-suited for rough conditions or long poles. Features a soft rubber cover with a molded-in gasket to protect the socket from moisture and debris when pole light is stowed away. Provides a 2-pin socket and a 7.5° angle and installs on narrow gunwales or deck areas. Completely non-corrosive, they feature contacts which ar... read+

● Completely sealed and waterproof. 3 watts at 12 V ● Visibility 2 Nautical Miles, 360º, for boats up to 12 m in length ● LED technology keeps the light cool to the touch and lasts more than 50,000 hours of use ● The patented head joint adjusts from 15 degrees forward to 15 degrees behind. Simply align the lens with the horizon and tighten the adjusting screw. ● This navigation light simplifies... read+

● One-mile, 225° red/green light visibility for boats up to 39.4 ft. (12 meters).  ● Attwood offers a variety of durable stowaway combination pole-mounted sidelights for bow mounting. Each features an anodized aluminum pole that raises the light head for visibility above the trolling motor, anchor, or other equipment on the bow. When not in use, lights can be removed from base and stowed, so th... read+

● For use with 7.6 mm I.D. wire-supported ventilation hose. ● Hose installs from topside by turning the flange into the hose spiral, passing the hose through the deck hole, then mounting ventilator. ● No hose clamps needed. ● Corrosion-resistant plastic. ● Four holes required with #10 fasteners. read+

 Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised water barrier. All collector boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross sectional area requirements.  Suitable for installation on any flat or most contoured ... read+

● Durable strainers to prevent debris from clogging baitwell drains and aerator pumps. Formed on acetal plastic ● Caution: Aerator pump must be secured with aerator attachment nut prior to installing strainer. ● 19 mm thread fits with the: Attwood Thru-Hull with Strainer read+

● Thru-hull connector with strainer prevents clogging of the aerator pump. Strainer attaches to threads that extend beyond external retaining nut. Acetal construction. ● Caution: Do not use strainer as a thru-hull connector nut replacement. Thru-Hull connectors are designed for installation above the water line only. ● Inner diameter: 19 mm ● Maximum hull thickness: 3.6 cm ● Installation hole: ... read+

● Complete kit to install manual bilge pump with 3/4" or 1-1/8" I.D. hose outlet.  (1) 2-way on/off switch with bezel plate  (1) 3/4" I.D. x 5' corrugated hose  (1)thru-hull fitting for 3/4" I.D. hose  (2) Snap-It hose clamps  (2) 2-conductor 16-gauge wire, 20' long  (1) in-line fuse holder with two-amp fuse read+